- Posts: 5359
- Thank you received: 109
Miss
- mark1122
- Topic Author
- Offline
- User
- Keep twisting it
Less
More
03 Jul 2007 05:58 #154429
by mark1122
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Miss was created by mark1122
I just went for a ride with a freind, and he drives very fast.i was running in 5th at 6500 to 7000 rpm and it just died for a second (like the electrical died)then backfired, then resumed ok? it did it a couple of differant times but not allways?
my first thought was the dayna 2000 rey limiter but it is set at 8500rpm and i can hit 8500 rpm.
Any ideas? electrical,carbs?i think i was running on the pilot system,and the plugs look nicely tanned on the pilots(havent checked plugs on the needles yet)
my first thought was the dayna 2000 rey limiter but it is set at 8500rpm and i can hit 8500 rpm.
Any ideas? electrical,carbs?i think i was running on the pilot system,and the plugs look nicely tanned on the pilots(havent checked plugs on the needles yet)
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- mariozappa
- Offline
- User
Less
More
- Posts: 901
- Thank you received: 8
03 Jul 2007 06:30 #154438
by mariozappa
1977 KZ650C1
and the KZ650/KZ750 Conversion
Replied by mariozappa on topic Miss
Oddly enough...check out this thread.
kzrider.com/index.php?option=com_joomlab...54437&catid=2#154437
kzrider.com/index.php?option=com_joomlab...54437&catid=2#154437
1977 KZ650C1
and the KZ650/KZ750 Conversion
Please Log in or Create an account to join the conversation.
- mark1122
- Topic Author
- Offline
- User
- Keep twisting it
Less
More
- Posts: 5359
- Thank you received: 109
03 Jul 2007 06:39 #154441
by mark1122
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Replied by mark1122 on topic Miss
Thats wild. I just read that too.Thanks.Sounds like the exact same problem.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- Snakebyte
- Offline
- User
Less
More
- Posts: 550
- Thank you received: 2
03 Jul 2007 06:46 #154442
by Snakebyte
Replied by Snakebyte on topic Miss
kzrider.com/component/option,com_joomlab...w/catid,2/id,148248/
Just had a similar problem but mine happened at lower rpm.
It is gone now and dont know why.
Just had a similar problem but mine happened at lower rpm.
It is gone now and dont know why.
Please Log in or Create an account to join the conversation.