'95 Vulcan 500 (en500) coils on a '79 KZ 750?

More
19 Jun 2007 13:08 #150912 by Jornum1
Does anyone know if I can swap EN500 coils into my '79 KZ750? I got these for free, they are from a bike that only had 2500 miles on it. I just dont know what the specifics are of these coils.
Any insight would be great,
Thanks,
Jay

Please Log in or Create an account to join the conversation.

More
19 Jun 2007 13:18 #150913 by katjbus
Replied by katjbus on topic '95 Vulcan 500 (en500) coils on a '79 KZ 750?
you should match resistance readings, the replacement coils should have lower or less resistance than the ones you are replacing never more or you can burn up your ignition system

Please Log in or Create an account to join the conversation.

More
19 Jun 2007 13:58 #150919 by Jornum1
Replied by Jornum1 on topic '95 Vulcan 500 (en500) coils on a '79 KZ 750?
Thanks, does anyone know some resources for specs on this bike, or particular coil? I have done several searches, but cant find anything.
Thanks for your help.

Please Log in or Create an account to join the conversation.

More
20 Jun 2007 05:24 #151065 by loudhvx
Replied by loudhvx on topic '95 Vulcan 500 (en500) coils on a '79 KZ 750?
katjbus wrote:

you should match resistance readings, the replacement coils should have lower or less resistance than the ones you are replacing never more or you can burn up your ignition system


It's the other way. Coils with too little resistance will burn up points or ignitions. Your 79 750 is probably points. In that case, those coils will shorten the life of the points, unless you also use a ballast resistor.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum