Main Wiring Harness - Routing?

More
06 Jan 2007 14:19 #103767 by floridamba
Main Wiring Harness - Routing? was created by floridamba
My 82 1000ltd has the main wiring harness on the left side of the triple tree - when I go full-lock left the triple clamp pinches the wiring. This is not good.

How should this route? Under the bottom triple clamp and under the plastic badge and into the headlight?

If so, what is the best way to do this, drop the wheel and pull the forks down or disconnect and reconnect a gazillion wires?

many thanks in advance

Please Log in or Create an account to join the conversation.

  • KZQ
  • Offline
  • Administrator
  • Walking Behind the Corn May Not Be All That!
More
07 Jan 2007 08:29 #103928 by KZQ
Replied by KZQ on topic Main Wiring Harness - Routing?
A shot in the dark here, since I'm not experienced with your model but I believe that most KZ's have the harness routed on the left side. Are you sure that you can't just use some cable wraps to hold the harness out of the pinch zone?

KZCSI
www.KZ1300.com
Riders:
1968 BSA 441 Shooting Star, 1970 BSA 650 Lightning, 1974 W3, 1976 KZ900, 1979 KZ750 Twin, 1979 KZ750 Twin Trike, 1981 KZ1300, 1982 KZ1100 Spectre, 2000 Valkyrie, 2009 Yamaha Roadliner S. 1983 GL 1100
Projects:
1985 ZN1300

Please Log in or Create an account to join the conversation.

More
07 Jan 2007 08:36 #103932 by arobsum
Replied by arobsum on topic Main Wiring Harness - Routing?
KZCSI wrote:

A shot in the dark here, since I'm not experienced with your model but I believe that most KZ's have the harness routed on the left side. Are you sure that you can't just use some cable wraps to hold the harness out of the pinch zone?

KZCSI

yep...both my kz's are routed to the left as well. maybe you could pull up some slack somewhere?

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links