- Posts: 146
- Thank you received: 102
BACK IN THE DAY BY STREET FIGHTER LTD
- Dragbike_Mike
- Offline
- Sustaining Member
Street Fighter LTD wrote: And a shot of my Motor sucking the last few dollars left in my wallet LMAO
Funny how they have the ability to do that. 8^) And, thanks again, Dave, for taking the time to post all of the great pics!
Mike
Presently - 1980 KZ1000B4 LTD w/mild ported head, Megacycle cams, 1015cc Wiseco, Falicon Supercrank, R&D undercut trans
In a former life - KZ-based dragbike - CrMo car tire chassis, 1395cc, Hahn Racecraft turbo system, VP C16, Orient Express 3-spd auto, 7.80's @ 165-170.
Please Log in or Create an account to join the conversation.
- Street Fighter LTD
- Topic Author
- Away
- Moderator
- TURBO, Its Better to be Blown than Injected
- Posts: 4906
- Thank you received: 2052
My LTD becoming a Turbo and my friend Teds 78 Z1R on its first complete rebuild .
It has a ATP Turbo on his and a Mr Turbo on mine .
It was a great winter that year working on our two projects together
Dave
Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn
Please Log in or Create an account to join the conversation.
- Street Fighter LTD
- Topic Author
- Away
- Moderator
- TURBO, Its Better to be Blown than Injected
- Posts: 4906
- Thank you received: 2052
Then we went twith the turbo setup like Bill Hahn was running with great success. Kevin also played around with the large intercooler just
in front of the rear slick ( Look closely ). We also ran a KMS ( Jerry Korman ) 3 and 4 speed drag only transmission . No down shifting possible
with this set up.
More later
Dave
Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn
Please Log in or Create an account to join the conversation.
- Dragbike_Mike
- Offline
- Sustaining Member
- Posts: 146
- Thank you received: 102
Street Fighter LTD wrote: When the Big Digger first appeared at Kevins House He played around with a centrifical supercharger mounted up front where you now see the turbo.
Then we went twith the turbo setup like Bill Hahn was running with great success. Kevin also played around with the large intercooler just
in front of the rear slick ( Look closely ). We also ran a KMS ( Jerry Korman ) 3 and 4 speed drag only transmission . No down shifting possible
with this set up.
More later
Dave
Hey Dave - great pics! Was Big Digger fuel injected on alcohol? Injected turbo/alky is the classic F/B combo but I don't want to assume anything.... Thanks again.
Mike
Presently - 1980 KZ1000B4 LTD w/mild ported head, Megacycle cams, 1015cc Wiseco, Falicon Supercrank, R&D undercut trans
In a former life - KZ-based dragbike - CrMo car tire chassis, 1395cc, Hahn Racecraft turbo system, VP C16, Orient Express 3-spd auto, 7.80's @ 165-170.
Please Log in or Create an account to join the conversation.
- Street Fighter LTD
- Topic Author
- Away
- Moderator
- TURBO, Its Better to be Blown than Injected
- Posts: 4906
- Thank you received: 2052
Dragbike_Mike wrote:
Street Fighter LTD wrote: When the Big Digger first appeared at Kevins House He played around with a centrifical supercharger mounted up front where you now see the turbo.
Then we went twith the turbo setup like Bill Hahn was running with great success. Kevin also played around with the large intercooler just
in front of the rear slick ( Look closely ). We also ran a KMS ( Jerry Korman ) 3 and 4 speed drag only transmission . No down shifting possible
with this set up.
More later
Dave
Hey Dave - great pics! Was Big Digger fuel injected on alcohol? Injected turbo/alky is the classic F/B combo but I don't want to assume anything.... Thanks again.
Mike
Hey Mike
Yes the Big Digger has Hilborn mechanical Injectors. Running Alky and Tip the can with Nitro
Kinsler set up the injection for the bike.
Dave
Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn
Please Log in or Create an account to join the conversation.
- Dragbike_Mike
- Offline
- Sustaining Member
- Posts: 146
- Thank you received: 102
[/quote]
Hey Mike
Yes the Big Digger has Hilborn mechanical Injectors. Running Alky and Tip the can with Nitro
Kinsler set up the injection for the bike.
Dave[/quote]
Good stuff - thanks Dave! You wonder how many sprint cars that are out there running Kinsler/Hilborn setups? The gold standard of the day, for sure.
Presently - 1980 KZ1000B4 LTD w/mild ported head, Megacycle cams, 1015cc Wiseco, Falicon Supercrank, R&D undercut trans
In a former life - KZ-based dragbike - CrMo car tire chassis, 1395cc, Hahn Racecraft turbo system, VP C16, Orient Express 3-spd auto, 7.80's @ 165-170.
Please Log in or Create an account to join the conversation.
- Street Fighter LTD
- Topic Author
- Away
- Moderator
- TURBO, Its Better to be Blown than Injected
- Posts: 4906
- Thank you received: 2052
His shop was about 20 minutes from our homes so we loaded up the Big Digger into the van and headed over with out a appointment .
So all 3 of us walk in the door of Kinsler's shop and he takes one look at us and snickers. He was polite enough but I know he thought
" OH Boy, Here we go again " Young guys saying they are racers and probably dont belong here LOL. Well Kevin spoke to him and
Kinsler finally agreed to look at our race bike "wink , wink " to get us out of his hair.
So we go outside and Kevin opens the vans side doors and Kinsler looks in , pauses , then says " Drive around back and lets bring this into my shop "
So now Kinsler is treating us with respect as he is so use to wannabes bothering him . He just assumed " More Punks "
So we had a great visit and left the bike for Kinsler to do his magic and get us dialed in . Living in the burbs of Detroit back in the day
was a thing of beauty for racers , as we had a lot of the best in the business all around us.
Hope you liked this
Dave
Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn
Please Log in or Create an account to join the conversation.
- Dragbike_Mike
- Offline
- Sustaining Member
- Posts: 146
- Thank you received: 102
Street Fighter LTD wrote: Our first meeting with Kinsler was kinda funny as I think back.
His shop was about 20 minutes from our homes so we loaded up the Big Digger into the van and headed over with out a appointment .
So all 3 of us walk in the door of Kinsler shop and he takes one look at us and snickers. He was polite enough but I know he thought
" OH Boy, Here we go again " Young guys saying they are racers and probably dont belong here LOL. Well Kevin spoke to him and
Kinsler finally agreed to look at our race bike "wink , wink " to get us out of his hair.
So we go outside and Kevin opens the vans side doors and Kinsler looks in , pauses , then says " Drive around back and lets bring this into my shop "
So now Kinsler is treating us with respect as he is so use to wannabes bothering him . He just assumed " More Punks "
So we had a great visit and left the bike for Kinsler to do his magic and get us dialed in . Living in the burbs of Detroit back in the day
was a thing of beauty for racers , as we had a lot of the best in the business all around us.
Hope you liked this
Dave
Great story - thanks Dave! You guys certainly earned the respect of Mr. Kinsler (and many others, I'm sure). One look at the Big Digger and you can tell that you guys were involved with some serious business.
Mike
Presently - 1980 KZ1000B4 LTD w/mild ported head, Megacycle cams, 1015cc Wiseco, Falicon Supercrank, R&D undercut trans
In a former life - KZ-based dragbike - CrMo car tire chassis, 1395cc, Hahn Racecraft turbo system, VP C16, Orient Express 3-spd auto, 7.80's @ 165-170.
Please Log in or Create an account to join the conversation.
- Street Fighter LTD
- Topic Author
- Away
- Moderator
- TURBO, Its Better to be Blown than Injected
- Posts: 4906
- Thank you received: 2052
I will post more Back IN The Day pictures and text
Enjoy your Sundays
Dave
Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn
Please Log in or Create an account to join the conversation.
- PaintWorkz
- Offline
- User
Another Detroit area Digger that never lived up to it's potential was out there a little before Kevin.
Attachment not found
www.paintworkz.com
84 Gpz900 street
77 KZ 1325 Turbo Dragbike project
79 CBX Pro Stock projects (2)
78 Z1R-TC AMA & ECTA LSR record holder
68 750 Enfield Brat project
82 750 Nourish Triumph LSR
Lake Havasu City, AZ
Please Log in or Create an account to join the conversation.
- Street Fighter LTD
- Topic Author
- Away
- Moderator
- TURBO, Its Better to be Blown than Injected
- Posts: 4906
- Thank you received: 2052
PaintWorkz wrote: Kevin " the Taxi Driver" and his dad were cool people for sure.
Another Detroit area Digger that never lived up to it's potential was out there a little before Kevin.Attachment not found
Hey Ralph
Good to hear from you.
If you have any more pictures you want to post please do so.
I dont have many of Kevin's 2nd dragster ( Big Digger )
And you may remember more details too.
Memory is the first thing to go ( Maybe )
Dave
PS Always loved your paint work on our bikes
Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn
Please Log in or Create an account to join the conversation.
- PaintWorkz
- Offline
- User
www.paintworkz.com
84 Gpz900 street
77 KZ 1325 Turbo Dragbike project
79 CBX Pro Stock projects (2)
78 Z1R-TC AMA & ECTA LSR record holder
68 750 Enfield Brat project
82 750 Nourish Triumph LSR
Lake Havasu City, AZ
Please Log in or Create an account to join the conversation.