JIS Impact Driver

More
17 Apr 2014 20:24 - 17 Apr 2014 20:28 #629460 by nickleo373
JIS Impact Driver was created by nickleo373
Hey everyone.
It's finally time to replace the old carb intake boots. The previous owner had attempted to remove them for some reason and began to cam out the JIS heads. I need a JIS screwdriver that is also and impact driver to hopefully extract the screws without further damaging them. I came across a vessel brand screwdriver on amazon and saw that it had pretty good reviews, however I very rarely trust the reviews from the amazon website. I was wondering if somebody could give me some feedback on the overall brand as well as any experience with the quality of this particular impact driver.
www.amazon.com/Vessel-125941-P2x100-Impa...ords=jis+screwdriver
Thanks

1981 KZ550C LTD
"If you ain't first, you're last"
Last edit: 17 Apr 2014 20:28 by nickleo373.

Please Log in or Create an account to join the conversation.

More
17 Apr 2014 20:39 #629463 by 650ed
Replied by 650ed on topic JIS Impact Driver
I have some Vessel bits and they are high quality. I have not used the impact driver shown, but I would expect it to be a good tool. Ed

1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
The following user(s) said Thank You: nickleo373

Please Log in or Create an account to join the conversation.

More
17 Apr 2014 20:40 #629464 by nickleo373
Replied by nickleo373 on topic JIS Impact Driver
Thanks for the reply. I'll order it and give it a shot

1981 KZ550C LTD
"If you ain't first, you're last"

Please Log in or Create an account to join the conversation.

More
18 Apr 2014 02:38 #629481 by Mcdroid
Replied by Mcdroid on topic JIS Impact Driver
I have a number of Vessel hand tools...they are all quality. Pricey, but worth the investment.

Michael
Victoria, Texas

1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A

The following user(s) said Thank You: nickleo373

Please Log in or Create an account to join the conversation.

More
18 Apr 2014 07:25 #629487 by Patton
Replied by Patton on topic JIS Impact Driver



Hand-held impact driver is used with a hammer.

Twisting force is selectable for either direction, clockwise or counter-clockwise.

The bit-retainer fits onto the tool's standard 3/8" socket holder.

Removing the bit-retainer (just pull it off) enables attaching any size 3/8" socket.

Good Fortune! :)

1973 Z1
KZ900 LTD
Attachments:
The following user(s) said Thank You: nickleo373

Please Log in or Create an account to join the conversation.

More
18 Apr 2014 15:01 - 18 Apr 2014 15:10 #629526 by LarryC
Replied by LarryC on topic JIS Impact Driver
No eBay APP ID and/or Cert ID defined in Kunena configurationThere's only 1 hand impact driver worth having in your box and SnapOn makes it. Use one and you'll never look back. I know it's a lot of money but you'll have it for life and it works like you can't believe. Longer than most so it fits your hand better Anybody that's ever borrowed mine is amazed how easily it will break a screw or bolt loose.




Conversely...Snap On phillips head impact bits...SUCK. Too brittle. You can get different tips elsewhere

Larry C.
Last edit: 18 Apr 2014 15:10 by LarryC.
The following user(s) said Thank You: nickleo373

Please Log in or Create an account to join the conversation.

More
18 Apr 2014 18:08 #629545 by nickleo373
Replied by nickleo373 on topic JIS Impact Driver
Those both look like they're really good quality. Perhaps I'll be able to afford them someday when I'm not a poor college student :(

1981 KZ550C LTD
"If you ain't first, you're last"

Please Log in or Create an account to join the conversation.

More
18 Apr 2014 18:13 #629547 by Mcdroid
Replied by Mcdroid on topic JIS Impact Driver

nickleo373 wrote: Those both look like they're really good quality. Perhaps I'll be able to afford them someday when I'm not a poor college student :(


Hahahaha....poor college student....it doesn't get better...30 years later and I'm now a poor ex-college student :laugh: :laugh: :laugh:

Michael
Victoria, Texas

1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A

Please Log in or Create an account to join the conversation.

More
18 Apr 2014 18:15 #629549 by murquiza
Replied by murquiza on topic JIS Impact Driver
I have a set of Vessel including the impacta model and they are very good.

Bikes:
1979 KZ650-D2 SR
2006 Vulcan 2000-A
2006 ZX10R
2008 Versys KLE650
The following user(s) said Thank You: nickleo373

Please Log in or Create an account to join the conversation.

More
18 Apr 2014 18:57 #629552 by nickleo373
Replied by nickleo373 on topic JIS Impact Driver

Mcdroid wrote:

nickleo373 wrote: Those both look like they're really good quality. Perhaps I'll be able to afford them someday when I'm not a poor college student :(


Hahahaha....poor college student....it doesn't get better...30 years later and I'm now a poor ex-college student :laugh: :laugh: :laugh:


Well I can dream :laugh:

1981 KZ550C LTD
"If you ain't first, you're last"

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum