Fix for shrunken fuel pipes

More
07 Oct 2009 15:00 #326051 by moneypit
Fix for shrunken fuel pipes was created by moneypit
640
I used 3/8" heat shrink tubing and slide it over the end give it a little heat and done. they fit nice and snug that they are tough to turn when back in place.
2-76 kz900
St Paul MN
Attachments:

Please Log in or Create an account to join the conversation.

More
07 Oct 2009 16:09 #326056 by MFolks
Replied by MFolks on topic Fix for shrunken fuel pipes
Be careful when buying heatshrink tubing, some have a meltable inner liner that will make the fix a real problem if you don't notice it.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

More
07 Oct 2009 18:05 #326076 by moneypit
Replied by moneypit on topic Fix for shrunken fuel pipes
Good point, this is what I bought and reserch online says gas resistantB)
640
2-76 kz900
St Paul MN
Attachments:

Please Log in or Create an account to join the conversation.

More
08 Oct 2009 09:46 #326174 by fixer5000
Replied by fixer5000 on topic Fix for shrunken fuel pipes
another great idea!!!
1978 kz650b pretty much stock
\\\\\\\" get there fast but arrive alive \\\\\\\"
massachusetts

Please Log in or Create an account to join the conversation.

More
08 Oct 2009 17:13 #326248 by kawsakiman
Replied by kawsakiman on topic Fix for shrunken fuel pipes
nice tip!
i would've never thought of that.
someday i will be able to afford my kz habit.

Please Log in or Create an account to join the conversation.

More
12 Oct 2009 17:03 #327126 by chance
Replied by chance on topic Fix for shrunken fuel pipes
Good deal.. I use teflon tape. You're a smart Guy..

Please Log in or Create an account to join the conversation.

More
16 Oct 2009 11:36 #327868 by mtkawboy
Replied by mtkawboy on topic Fix for shrunken fuel pipes
I dip the ends in Plasti-Dip one at a time once & let it dry hanging with the end pointed down, then do the other. Works for me, your results may vary. Plasti-Dip is what you dip plier handles in. I will try the shrink tubing, very clever. Ive used the teflon tape too.
78-KZ1000/1105, 80 KZ1000, 82 Kawasaki GPZ750, 95 Harley Fatboy, 80 Suzuki GS1100ET, 81 GS1100E parts bike, 83 GS1100SD Katana/1394,78 Yamaha XT500, 81 Yamaha XS650, 78 Yamaha XS650E, 48 Whizzer model J motorbike, 71 Honda CT70H, 71 Honda CT70, 81 IT 250 Yamaha,82 Honda XL100S owned

Please Log in or Create an account to join the conversation.

More
16 Oct 2009 18:26 - 01 Sep 2014 06:51 #327932 by Patton
Replied by Patton on topic Fix for shrunken fuel pipes
The best option sometimes. :cheer:

Click here > New fuel pipe joint from Z1E

Good Luck! :)
1973 Z1
KZ900 LTD
Last edit: 01 Sep 2014 06:51 by Patton.

Please Log in or Create an account to join the conversation.

More
29 Aug 2014 22:42 #645648 by kzdcw
Replied by kzdcw on topic Fix for shrunken fuel pipes
Definitely Z1 Ent. has the Fuel T's and is the Best Option, but saving Money is always Good!

Moneypit, how is the shrink tubing holding up? I have some inexpensive 3/8" Harbor Freight heat shrink tubing, but don't what type of chemical resistive properties it may have?
77' KZ1000A

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links