Clutch thickness

More
17 Jun 2024 10:10 #900876 by Maxbou92
Clutch thickness was created by Maxbou92
Hello guys, does someone has the thickness of a friction disc of a kz750 4cylinders?! Mine have 3.7mm ..
Kz750e 1980

Please Log in or Create an account to join the conversation.

More
17 Jun 2024 10:42 - 17 Jun 2024 10:45 #900883 by F64
Replied by F64 on topic Clutch thickness
3.5mm. You have 0.2mm remaining.



81-KZ440-D2.
Louis Dudzik's GM HEI ignitor conversion installed 2015 s3.amazonaws.com/gpzweb/Ignition/GPZgmHEImod.html
Motogadget m-unit blue installed 2017.
LIC, NY
Last edit: 17 Jun 2024 10:45 by F64.
The following user(s) said Thank You: Nessism

Please Log in or Create an account to join the conversation.

More
17 Jun 2024 18:36 #900907 by Maxbou92
Replied by Maxbou92 on topic Clutch thickness
Thank youuu!! Do you know how much mm when its brand neww ?!
Kz750e 1980

Please Log in or Create an account to join the conversation.

More
17 Jun 2024 19:31 #900908 by F64
Replied by F64 on topic Clutch thickness
It varies depending on brand. It could be anywhere from 3.55-3.85mm
81-KZ440-D2.
Louis Dudzik's GM HEI ignitor conversion installed 2015 s3.amazonaws.com/gpzweb/Ignition/GPZgmHEImod.html
Motogadget m-unit blue installed 2017.
LIC, NY

Please Log in or Create an account to join the conversation.

More
18 Jun 2024 06:10 #900922 by Maxbou92
Replied by Maxbou92 on topic Clutch thickness
I appreciate!! The bike has 75 000km with original clutch!! All is new, except the clutch and I’m very surprised about the « wear » of this one !! 
Kz750e 1980

Please Log in or Create an account to join the conversation.

More
18 Jun 2024 06:51 #900923 by Nessism
Replied by Nessism on topic Clutch thickness
Be sure to replace the springs.  Stock work fine.  Aftermarket springs tend to be higher tension, which can tire out your hand.  Also, lube or replace the cable with OEM.  You will be amazed how smooth the clutch feels with a new and lubed cable.  
Ed
Carb O-ring Kits : www.kzrider.com/forum/3-carburetor/61807...-o-ring-kits?start=0

www.kzrider.com/forum/faq-wiki/618026-new-owner-things-to-know

1981 KZ750E2
www.kzrider.com/forum/11-projects/604901...z750e-project-thread

Please Log in or Create an account to join the conversation.

More
18 Jun 2024 07:47 #900926 by Maxbou92
Replied by Maxbou92 on topic Clutch thickness
Yess thank you, I run Barnett springs and new cable!! Today I go to the Dyno!! With my new vm28ss and air jet corrector from Zed !!! 
Kz750e 1980

Please Log in or Create an account to join the conversation.

More
19 Jun 2024 09:09 #900969 by Injected
Replied by Injected on topic Clutch thickness
You should post the dyno results. I am thinking around 70HP at the wheel.

Please Log in or Create an account to join the conversation.

More
19 Jun 2024 13:44 - 19 Jun 2024 13:45 #900986 by Maxbou92
Replied by Maxbou92 on topic Clutch thickness
I guess I will be more satisfied about it!! He was running good but not performing like I want for a new engine-porting-milled head- Vm28mm- 4-1 pipe and pods!! 155psi on each cylinders!! My girlfriend has a Fz07 and she smokes me like I had a scooter !!! ??? How many 70hp it gives to engine ?! And torque should be how many?
Kz750e 1980
Last edit: 19 Jun 2024 13:45 by Maxbou92.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links