GPZ 750 turbo questions

I have always considered the last version of my bike being turbo. Currently i have a stripped down cafe build happening. Does anyone know of a write up about the parts list needed to turbo a 750-4. The engine would be built accordingly. Just looking to start to gather parts, under stand wiring, and plumbing of the system.
Thanks guys
 Eric 


 

I would suggest searching the archive but it is off line for some reason.
You do know the GPz750 Turbo pistons use a larger wrist pin than standard 750s?
The old school kits used a draw thru (the carb) vs. a blow thru like the factory.
Try this site   The Turbo Forums     .
They have sections for motorcycles and diy.


.

Well, Kawasaki made a KZ750 Turbo model, so looking at the manual and parts fishe for that bike would seem like an obvious place to start.

 

www.750turbo.com is the right site for your questions and offers many service manuals,troubleshooting guides and turbo parts diagrams.

www.750turbo.com/forum/viewforum.php?f=2...6f4403316febc67d8360

 
 

gixxerkidd03 wrote:

I have always considered the last version of my bike being turbo. Currently i have a stripped down cafe build happening. Does anyone know of a write up about the parts list needed to turbo a 750-4. The engine would be built accordingly. Just looking to start to gather parts, under stand wiring, and plumbing of the system.
Thanks guys
 Eric 

I have a set of factory turbo pistons and rods I've been hoading for years if your interested.


.