New model

  • TexasKZ
  • Topic Author
  • Offline
  • Platinum Member
More
06 Jan 2024 05:50 #893671 by TexasKZ
New model was created by TexasKZ
Rumor sez Kawasaki has this sweet little 400 in the pipeline. I wonder if it will come to the U.S.?

 

1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough
The following user(s) said Thank You: ThatGPzGuy, 78kawltd, howardhb

Please Log in or Create an account to join the conversation.

  • Street Fighter LTD
  • Offline
  • Moderator
  • TURBO, Its Better to be Blown than Injected
More
06 Jan 2024 06:45 #893674 by Street Fighter LTD
Replied by Street Fighter LTD on topic New model
I vote for the top one 
Liquid cooled 4 cylinder


Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn

Please Log in or Create an account to join the conversation.

  • slmjim+Z1BEBE
  • Offline
  • User
  • Enjoy Life! IT HAS AN EXPIRATION DATE!
More
06 Jan 2024 08:00 #893678 by slmjim+Z1BEBE
Replied by slmjim+Z1BEBE on topic New model
The Z900 looks good to us until the front of the rear tire on back. Then, too much empty space. Curious they don't show the rear of the Z400...

If Mama Kaw shows us a dual-shock 750 ~ 1000 similar to the late Honda CB1100, we'll talk.

slmjim & Z1BEBE

A biker looks at your engine and chrome.
A Rider looks at your odometer and tags.

1973 ('72 builds) Z1 x2
1974 Z1-A x2
1975 Z1-B x2
1993 CB 750 Nighthawk x2
2009 ST1300A

www.kawasaki-z-classik.com
An enthusiast's forum focused exclusively
on all things Z1, Z2 and KZ900.

The following user(s) said Thank You: howardhb

Please Log in or Create an account to join the conversation.

More
07 Jan 2024 16:07 - 07 Jan 2024 16:08 #893724 by rstnick
Replied by rstnick on topic New model
And they make the z400rs a four cylinder, yet the z650rs is only a twin!
The 400 looks nice.
Inverted forks (USD) again the 650 did not get (not much suspension adjustability either)..

Rob
CANADA

Need a key for your Kawasaki? PM me

1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, Progressive Suspension, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s
Last edit: 07 Jan 2024 16:08 by rstnick.

Please Log in or Create an account to join the conversation.

More
07 Jan 2024 18:31 - 08 Jan 2024 05:05 #893731 by martin_csr
Replied by martin_csr on topic New model
By rstnick:  And they make the z400rs a four cylinder, yet the z650rs is only a twin! ... 

In case you aren't aware Kawasaki made a Z400-4cyl back in the day.  and apparently similar to the Z500/550 as they're covered in the same manuals (that I've seen).  The 400F and 400J were a couple of them. I'm not very familiar with the model range. Also, the ZX600-4 has been around for decades. 
Last edit: 08 Jan 2024 05:05 by martin_csr.

Please Log in or Create an account to join the conversation.

  • TexasKZ
  • Topic Author
  • Offline
  • Platinum Member
More
07 Jan 2024 20:18 #893737 by TexasKZ
Replied by TexasKZ on topic New model
The new ZX400 RR is evidently a stunning performer. I hope most of that carries over to the masked bike and I hope it comes to the U.S.

1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough

Please Log in or Create an account to join the conversation.

More
08 Jan 2024 11:05 #893774 by david richard
Replied by david richard on topic New model
well i like the bottom one as its been said the rear end just looks to empty its very rare to find a bike that you like all of it ,i know its driven by progress but twin shock would fill that space

Please Log in or Create an account to join the conversation.

  • Wookie58
  • Away
  • Moderator
More
08 Jan 2024 11:49 #893777 by Wookie58
Replied by Wookie58 on topic New model

well i like the bottom one as its been said the rear end just looks to empty its very rare to find a bike that you like all of it ,i know its driven by progress but twin shock would fill that space
And then "Luddites" like me come along and remove the twin shocks for a cleaner look 

Please Log in or Create an account to join the conversation.

More
08 Jan 2024 15:16 - 08 Jan 2024 15:18 #893786 by rstnick
Replied by rstnick on topic New model

By rstnick:  And they make the z400rs a four cylinder, yet the z650rs is only a twin! ... 

In case you aren't aware Kawasaki made a Z400-4cyl back in the day.  and apparently similar to the Z500/550 as they're covered in the same manuals (that I've seen).  The 400F and 400J were a couple of them. I'm not very familiar with the model range. Also, the ZX600-4 has been around for decades. 


 
Oh, I know there have been many 400/4s.
The 650 though has always been a four cylinder, until recently.
The 650 twin is used in many models, and for many years already.
I'm not surprised it ended up in the 2022 z650rs.

A four cylinder would have been my choice.
 

Rob
CANADA

Need a key for your Kawasaki? PM me

1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, Progressive Suspension, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s
Last edit: 08 Jan 2024 15:18 by rstnick.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum