- Posts: 1077
- Thank you received: 569
Starting restoratin project KZ650
- Injected
- Offline
- User
Less
More
06 Oct 2024 15:17 - 06 Oct 2024 15:19 #904908
by Injected
You may be able to verify that info by using the search function.
Replied by Injected on topic Starting restoratin project KZ650
I believe those original dampers are no longer available but the dampers from the ZR7 series machines are the same size, Kawi PN 92075-1227I was going to check the rubber damper on the secondary shaft but the 3 Allen head bolts holding the starter motor clutch on will not budge, been applying RP7 over the last couple of days but I think if I try too hard they will snap. They are clean no corrosion just very tight. Any suggestions, I don't want to apply too much heat because of the rubber damper.
You may be able to verify that info by using the search function.
Last edit: 06 Oct 2024 15:19 by Injected.
The following user(s) said Thank You: Vietvet
Please Log in or Create an account to join the conversation.
- Injected
- Offline
- User
Less
More
- Posts: 1077
- Thank you received: 569
08 Oct 2024 16:40 #904960
by Injected
Replied by Injected on topic Starting restoratin project KZ650
Found the damper reference :
www.kzrider.com/forum/11-projects/610746...cafe-racer?start=324
About half way down that page.
www.kzrider.com/forum/11-projects/610746...cafe-racer?start=324
About half way down that page.
Please Log in or Create an account to join the conversation.
- Nessism
- Away
- Sustaining Member
Less
More
- Posts: 7553
- Thank you received: 2868
08 Oct 2024 16:57 - 08 Oct 2024 17:03 #904964
by Nessism
Replied by Nessism on topic Starting restoratin project KZ650
Those dampers are in the secondary shaft. Partzilla lists them as still available. Another huge improvement can be gained by changing the rubber dampers in the clutch. A guy on the KZ750 Turbo site sells them, or at least he used to.
After being out of stock for a couple of weeks I'm glad to announce I've got a fresh batch of Viton dampers ready to ship.
The cost is still $45 US for a set of six. Shipping costs can be found in earlier posts.
So if you're interested contact me at turbosteve84 "at" verizon.net. I'm in the US.
Thanks,
Steve
After being out of stock for a couple of weeks I'm glad to announce I've got a fresh batch of Viton dampers ready to ship.
The cost is still $45 US for a set of six. Shipping costs can be found in earlier posts.
So if you're interested contact me at turbosteve84 "at" verizon.net. I'm in the US.
Thanks,
Steve
Last edit: 08 Oct 2024 17:03 by Nessism.
Please Log in or Create an account to join the conversation.