New Member Intro

More
22 Jan 2024 13:38 #894316 by BlueR32
New Member Intro was created by BlueR32
Greetings from NC USA! I just joined having recently acquired the sleeping beauty pictured below from a neighbor (1979 KZ650C). It had been sleeping outside for a few years and whoever the previous owner(s) were they did a very rough cafe racer job on it. I managed to get her started and the motor sounds pretty good. A little bit of history: I grew up in Ireland and in 1977 I actually bought a brand new Z650 (red) when they first came out. I loved that bike but I always had a regret that I didn't wait for the C model to come out with the twin discs and the cast wheels. Maybe this was meant to be! Looking forward to posting more once I decide the path I'm going down with this.
 
The following user(s) said Thank You: howardhb

Please Log in or Create an account to join the conversation.

  • Street Fighter LTD
  • Offline
  • Moderator
  • TURBO, Its Better to be Blown than Injected
More
22 Jan 2024 15:05 #894318 by Street Fighter LTD
Replied by Street Fighter LTD on topic New Member Intro
Welcome to KZRider
Dave

Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn

Please Log in or Create an account to join the conversation.

  • Wookie58
  • Away
  • Moderator
More
22 Jan 2024 16:26 #894321 by Wookie58
Replied by Wookie58 on topic New Member Intro
Welcome from the UK
1982 KZ1000 Ltd
www.kzrider.com/forum/11-projects/617631...-82-begins?start=192
kzrider.com/filebase-alias?view=download...d-fault-diagnosis&ca

Please Log in or Create an account to join the conversation.

More
22 Jan 2024 21:33 #894325 by sf4t7
Replied by sf4t7 on topic New Member Intro
welcome to our version of fun

Scotty

1974 Z1A
1015
welded Z1 crank
Andrews 1X Cams
Delkevic 4 into 1
Superbike bars
530 conversion

Please Log in or Create an account to join the conversation.

More
23 Jan 2024 02:28 #894328 by Mcdroid
Replied by Mcdroid on topic New Member Intro
Welcome to KZRider!
Michael
Victoria, Texas

1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A

Please Log in or Create an account to join the conversation.

  • ThatGPzGuy
  • Offline
  • Sustaining Member
  • More Sparky than Speed Racer
More
23 Jan 2024 05:28 #894335 by ThatGPzGuy
Replied by ThatGPzGuy on topic New Member Intro
Welcome. That 650 has a lot of potential. 
Jim
North GA
2016 Yamaha FJR1300ES
1982 GPz750 R1
1974 Kawasaki H1
1976 Kawasaki KZ400
1979 Yamaha XS650 cafe'
2001 KZ1000P
2001 Yamaha YZ426
1981 Honda XR200 stroked in an '89 CR125 chassis
1965 Mustang
1967 Triumph GT6
1976 Bronco
"If you didn't build it, it's not really yours"

Please Log in or Create an account to join the conversation.

  • TexasKZ
  • Away
  • Platinum Member
More
24 Jan 2024 04:45 #894368 by TexasKZ
Replied by TexasKZ on topic New Member Intro
Welcome aboard, and thank you for saving another KZ.
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough

Please Log in or Create an account to join the conversation.

More
24 Jan 2024 16:06 #894399 by Rryanflakz
Replied by Rryanflakz on topic New Member Intro
Hello from Tierra Verde, FL

Please Log in or Create an account to join the conversation.

More
15 Feb 2024 17:37 #895299 by rstnick
Replied by rstnick on topic New Member Intro
Welcome.
Looking at the solid (non drilled) rotors, and that rear caliper.
I think you may have a 1978 C2 model.
They're the best. 
[img




 
Rob
CANADA

Need a key for your Kawasaki? PM me

1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, Progressive Suspension, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s
The following user(s) said Thank You: BlueR32

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links