New guy

  • kawabunga500
  • Topic Author
  • Offline
  • User
More
22 Jan 2007 03:57 #107395 by kawabunga500
New guy was created by kawabunga500
Greetings fellow K-riders!

I recently purchased a 1992 Kawasaki Vulcan 500AE as a back up/project bike. It's definitely turning into a project! It ram when I first got it, but needed a new petcock. (On order). I pulled the carbs and noticed gasoline leaking from the air intake carb duct. There is also a short somewhere in the electrical system where the ground lead from the battery connects to the bike.

Electrical short + gasoline = big trouble. :)

I bought a new wiring harness since the one on the bike was melted in a few spots, and also just purchased a set of carbs for a '94 Vulcan (I was told they are virtually interchangeable). I'm hoping the new wiring harness will fix the short in the system, and repair the turning signal problem (they aren't working).

I have a friend who used to own a 750 Vulcan, and he is going to help me fix the problems throw it all back together. Those wiring harnesses sure can be confusing. :)

I hope to have this done by spring. When I took it out for a test ride when I bought it, it ran pretty well, and that was before the new plugs and oil change and the leaking gas...

I'll be posting some pics at some point.

Post edited by: kawabunga500, at: 2007/01/22 06:57

Please Log in or Create an account to join the conversation.

  • wireman
  • Visitor
22 Jan 2007 07:43 #107425 by wireman
Replied by wireman on topic New guy
welcome to z-jungle!;)

Please Log in or Create an account to join the conversation.

More
22 Jan 2007 11:29 #107455 by Qdude
Replied by Qdude on topic New guy
Welcome !!

I'm sure that you will enjoy this site very much. It is always good to find a spot where those of a similar sickness can celebrate and commiserate. Not to mention, there is a wealth of knowledge here, and very forthcoming, kindly folk.

Post, post, and post again for good measure.

Cheers.

77 KZ 650 C1.
77 KZ 650 C1.
Crashed-Repaired, Pods, Kerker pipe, re-wired core bundle, lamp upgraded, homemade rectifier, solid state regulator , Dyna-s ignition, repainted, slightly modified, year-round commuter
Honda Metro 85 mpg Scooter. Dont laugh I will throw it at you

Please Log in or Create an account to join the conversation.

More
22 Jan 2007 13:10 #107469 by bullitt
Replied by bullitt on topic New guy
hi ;)

Please Log in or Create an account to join the conversation.

More
22 Jan 2007 19:20 #107543 by pumps
Replied by pumps on topic New guy
Welcome Welcome! Yes we must have pictures!

Check out our site. kcvjmc.org
1977 Yamaha XS650
2000 Kaw W650
2 KZ440 LTDs , a 79 KZ400H and an 83 Belt Drive

Please Log in or Create an account to join the conversation.

More
22 Jan 2007 19:38 #107553 by kzwolfsr
Replied by kzwolfsr on topic New guy
One of my neighbors/ riding partner who has gone to another state now has one of those bikes. It was a great bike and he wanted to sell it to me for $1000. That bike probably had more power than my kz650. The only thing I hated about it was the rear drum brakes, but it was cool. I might have a pic with a small glance of it

1979 KZ SR650, stock candy persimmon red and crossover pipes
1981 KZ 1000LTD with non stock and more comfortable handle bars and 4 into one V&H
Original man of the Caribbean
Attachments:

Please Log in or Create an account to join the conversation.

More
22 Jan 2007 19:40 #107555 by kzwolfsr
Replied by kzwolfsr on topic New guy
That is my bike as I bought it. The fairing had to go, ad the trunk too!

1979 KZ SR650, stock candy persimmon red and crossover pipes
1981 KZ 1000LTD with non stock and more comfortable handle bars and 4 into one V&H
Original man of the Caribbean

Please Log in or Create an account to join the conversation.

More
22 Jan 2007 19:48 #107558 by pumps
Replied by pumps on topic New guy
kzwolfsr do you still have the luggage rack and trunk?
I had a neighbor who had a 90' I think it was for sale for about 1000 but it had been dropped and had some dents.

Post edited by: pumps, at: 2007/01/22 22:50

Check out our site. kcvjmc.org
1977 Yamaha XS650
2000 Kaw W650
2 KZ440 LTDs , a 79 KZ400H and an 83 Belt Drive
Attachments:

Please Log in or Create an account to join the conversation.

More
22 Jan 2007 19:49 #107560 by kzwolfsr
Replied by kzwolfsr on topic New guy
Yep!

1979 KZ SR650, stock candy persimmon red and crossover pipes
1981 KZ 1000LTD with non stock and more comfortable handle bars and 4 into one V&H
Original man of the Caribbean

Please Log in or Create an account to join the conversation.

  • kawabunga500
  • Topic Author
  • Offline
  • User
More
23 Jan 2007 00:59 #107607 by kawabunga500
Replied by kawabunga500 on topic New guy
So I got the new wiring harness installed and it only took about 2 hours to thread through the bike. Yeah, at the time, I was ready to pitch the entire job, but bit by bit, it slowly came together.

The new pet cock will arrive tomorrow, and the carbs a day or two after that. New solenoids, new coils, new battery... man, I hope this bike rocks when I am done with it. :)

Please Log in or Create an account to join the conversation.

More
23 Jan 2007 07:16 #107630 by JUSTICE114
Replied by JUSTICE114 on topic New guy
Welcome KawaBunga-Dude!!!!!! ;) Enjoy your stay and post some pics!! If you dont post your pics......the photochoppers will post some for ya...:dry: you dont want that to happen! :unsure: :woohoo: :woohoo: :woohoo: :woohoo:

Please Log in or Create an account to join the conversation.

  • kawabunga500
  • Topic Author
  • Offline
  • User
More
23 Jan 2007 22:51 #107803 by kawabunga500
Replied by kawabunga500 on topic New guy
Then I will definitely be posting some pics... and soon. :)

I hooked up the battery to the new wiring harness and the bike has juice... however, the blinkers still aren't blinking in the front, and it doesn't appear I have lights in the back (other than the brake light). Having running lights in the front is new tho, so that's a good thing.

Does anyone know what steps I have to take to get the blinkers to blink? If they have juice, what could be the problem? Is there a switch somewhere?

Any help would be appreciated.

I am also going to throw the carbs back in this week now that the new petcock is in place. The bike is coming together!

Those carbs tho... that could be a pain getting them back in. Is there a step by step guide somewhere?

Thanks!

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum