TOPIC:

i got a 77 650kz b-1
the wires are all over!
if i jump a few wire it will run, but then there is the rest of them!...

i want to know what i need to just to run the bike?

i tried to come up with this diagram but not sure if it could work! not to sure if i should use the brown wire from regulator for my toggle switch or straight off the battery? is brown even hot? enough juice?
please look at it and give me your feedback

if you have a diagram of the (bare minimun)wires, that could help!
i can go battery-less and get condenser also if thats best way to do it!
just need a diagram for condenser setup, and what kind, and were to get one!
also the reasone for this is starter is broke for now!!!!
wher do i get a good condensr from???
thanks all

Post edited by: steveo_4192003, at: 2006/04/18 06:07

Post edited by: steveo_4192003, at: 2006/04/18 06:44

That look very good! You just need to hook up the brown on the regulator. I would recommend some fuses too, but only if you want.

Post edited by: loudhvx, at: 2006/04/18 12:26

You can't go batteryless on the 77 KZ650 without changing the alternator/regulator/rectifier, but you can use a tiny scooter battery like we did on this one.

thank you that was very very helpful!!!

thank you very much, that worked great. got her running and drives pretty good!!!!

now for the head light and tail light, break, and thats it for now ( just to keep legal a night)!!!!!

That's great!