Welcome, Guest

TOPIC:

Jet change after Using POD filters 15 Feb 2006 17:53 #24140

svcc2006 Topic Author Offline User Posts: 1 Thank you received: 0	I am converting from an airbox to pod air filters so I'll need bigger gas jets on my KZ 400. Can anyone tell me the exact jet needed?
	Please Log in or Create an account to join the conversation.

Jet change after Using POD filters 15 Feb 2006 18:27 #24149

OKC_Kent Offline User Posts: 1716 Thank you received: 20	Probably not without some more information. Do you know what jet is in there now? And then there's more. Oklahoma City, OK 78 KZ650 B2 82,000+ miles
	Please Log in or Create an account to join the conversation.

Jet change after Using POD filters 16 Feb 2006 05:31 #24238

wiredgeorge
Offline
User
Posts: 5310
Thank you received: 44

Put your year/model in your signature (and location as well) and you will get more specific help. You need to bump both the secondary main jets and main jets if you run pods else you will have flat spots; especially if you are using a non-stock exhaust system or have removed the baffles in your exhaust. You might want to mention what your current jetting and exhuast set up are for more specific answers as Kent mentioned!

wiredgeorge Motorcycle Carburetors
Mico TX
www.wgcarbs.com
Too many bikes to list!

Please Log in or Create an account to join the conversation.

Jet change after Using POD filters 16 Feb 2006 21:01 #24399

BRGMGBGT Offline User Posts: 28 Thank you received: 0	Also where you live, altitude? oops, Wiredgeorge already got that one. Post edited by: BRGMGBGT, at: 2006/02/17 00:04
	Please Log in or Create an account to join the conversation.

Forum

Index of Forums

Technical Forums

Carburetor

Jet change after Using POD filters