Source for "lowers"? (Windjammer)

More
11 Jun 2012 10:14 #528130 by Medina
Source for "lowers"? (Windjammer) was created by Medina
I've googled a bit, nothing on Vetters site, unless I missed it, fleabay has a few- wrong ones.
expansive craiglist search ("Search Tempest") and nuttin...

I know there are different ones, but would like to find a set to finish mine off.
Had hopes when I spotted the thread about the police bike the guy was chopping up, but alas

thanks in advance

1981 KZ1100 Vetter "Luminous Navy Blue" DAMN YOU COLOR CODES!
Medina, Oh
My Bike Thread
www.kzrider.com/forum/10-new-members/469298-from-ohio

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Offline
  • User
  • FIX UP YOUR BIKE RIGHT AND CHEAP
More
11 Jun 2012 10:32 #528131 by Motor Head
Replied by Motor Head on topic Source for "lowers"? (Windjammer)
No eBay APP ID and/or Cert ID defined in Kunena configurationLike these?

1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B...

Please Log in or Create an account to join the conversation.

More
11 Jun 2012 12:58 - 11 Jun 2012 13:07 #528164 by Medina
Replied by Medina on topic Source for "lowers"? (Vindicator)
I dont think so, I spotted those. Looked at them, I think those are for later versions.
The ones that went of windjammers with external signal mounts.

This from vetter site

Vetter Corporation made Windjammer and Vindicator fairings. In addition, the company made fairings for Kawasaki which were essentially Vindicator fairings. All these fairings accept the same windshield, the same lowers and will fit on any Vetter hardware.


But looking at a windjammer my neighbor has, on a honda, they are different-
but the vetter site says they all interchange
however mine does say "windjammer" on it, vs. the vindicators that were used..or so say their forums
..so, I'm overthinking it maybe..

1981 KZ1100 Vetter "Luminous Navy Blue" DAMN YOU COLOR CODES!
Medina, Oh
My Bike Thread
www.kzrider.com/forum/10-new-members/469298-from-ohio
Last edit: 11 Jun 2012 13:07 by Medina.

Please Log in or Create an account to join the conversation.

More
11 Jun 2012 13:17 - 11 Jun 2012 13:21 #528169 by Medina
Replied by Medina on topic Source for "lowers"? (Windjammer)
More than you wanted to know

We rebadged Vetter components for Kawasaki who designed and supplied their own graphics. The lowest Kawasaki Ser known: K32-101101 Highest K32-126686 is a rebadged Windjammer 5 from 1983

K35 was the prefix for Kawasaki Lowers


So, they are winjammer 5's, but have different lowers

K32-126011 owned by James Phillips




Before I sold the company, all Vetter fairings made for Kawsaki did not have the Leading Edge Lights The Kawasaki fairing above has the Leading Edge Lights of the Windjammer and it has a high serial number. This means that the company must have sold fairings to Kawasaki with these lights.


"The Windjammer 5 was contoured slightly differently. Lowers made for previous Windjammers will not fit Windjammer 5 and vice versa


perfect, just spotted that in a forum where a guy posted an email reply from Vetter

1981 KZ1100 Vetter "Luminous Navy Blue" DAMN YOU COLOR CODES!
Medina, Oh
My Bike Thread
www.kzrider.com/forum/10-new-members/469298-from-ohio
Last edit: 11 Jun 2012 13:21 by Medina.

Please Log in or Create an account to join the conversation.

More
15 Jun 2012 10:28 #529278 by Zrider
Replied by Zrider on topic Source for "lowers"? (Windjammer)
PM sent

73Z1
75Z1
77Kz 900 Sold
82Ltd 750 Sold
Eliminator 250

Please Log in or Create an account to join the conversation.

More
02 Dec 2013 18:50 #614658 by ronnie chabot
Replied by ronnie chabot on topic Source for "lowers"? (Windjammer)
hi
i have a set of lowers for the early windjamer
the ones with stock turn signels
30.00 plus shipping
ronnie

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum