- Posts: 3
- Thank you received: 0
windshield for a 1978 KZ1000
- bkayfetz
- Topic Author
- Offline
- User
Less
More
02 Jul 2010 13:40 #379708
by bkayfetz
windshield for a 1978 KZ1000 was created by bkayfetz
Any suggestions for an aftermarket windshield for a 1978 kz1000?
Preferably something that easily snaps on and off...
I'm thinking of a longer road trip and i think i need a little break from the wind!
tks
Ben
Preferably something that easily snaps on and off...
I'm thinking of a longer road trip and i think i need a little break from the wind!
tks
Ben
Please Log in or Create an account to join the conversation.
- Motor Head
- Offline
- User
- FIX UP YOUR BIKE RIGHT AND CHEAP
Less
More
- Posts: 5138
- Thank you received: 391
02 Jul 2010 13:52 #379710
by Motor Head
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B...
Replied by Motor Head on topic windshield for a 1978 KZ1000
I've been using the Slip Streamer "SportFire", I had a clear 1 on my 1000, but removed it a couple of weeks ago for installing a Vetter Fairing and Hard bags I picked up. I still have the windshield, listed on Craigs. Also have a smoked 1 on my 550. These come off with a twist of 2 T handled screws, leaving a set of clamps on the bars. They look good and block a reasonable amount of wind. Most all of the supplies have them, and Ebay of course.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B...
Please Log in or Create an account to join the conversation.