side cover emblems

  • irish mike
  • Topic Author
  • Offline
  • User
  • 79 kz 650 b3 rat rod
More
12 May 2010 20:43 #367591 by irish mike
side cover emblems was created by irish mike
hi all-started painting my tank[after stripping and prepping]after my brake fluid incident-anybody got a good way to remove the emblems from the sidecovers it looks like they are rivited on -the last thing i need right now is to crack a sidecover trying to get the logo off any help would be much appreciated thanks mike....

Please Log in or Create an account to join the conversation.

More
12 May 2010 21:18 #367594 by MFolks
Replied by MFolks on topic side cover emblems
Some are held in place with a "Push Nut" something more like a washer with teeth that grabs a stud coming out of the emblem.

If you have a Dremel tool with a small cut off wheel, it's possible with a steady hand to grind and weaken the washer so it can be removed.

If no luck, maybe www.reproductiondecals.com has a solution on removal of the washers/fasteners.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

More
12 May 2010 22:14 #367599 by nedrowjoe
Replied by nedrowjoe on topic side cover emblems
oh man i was creeping on your post guys and i thought for sure that this website would have the emblems i nee does anyone now where i can get csr 1000 emblems for an 81, one of the very few emblems this place does not have,:(

Please Log in or Create an account to join the conversation.

More
13 May 2010 01:41 #367611 by Mcdroid
Replied by Mcdroid on topic side cover emblems
yes... www.badgereplicas.com.au/badges_kawasaki.htm
Michael
Victoria, Texas

1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A

Please Log in or Create an account to join the conversation.

More
13 May 2010 06:06 #367628 by JMKZHI
Replied by JMKZHI on topic side cover emblems
Those push lock nuts are probably brittle from age like mine were. I kinda cut or scored them w a dremel cutoff wheel, then pried under them w a thin-bladed something or another - they kinda crumbled. Maybe yours will too.

Please Log in or Create an account to join the conversation.

More
13 May 2010 06:07 #367629 by otakar
Replied by otakar on topic side cover emblems
Here is another place that has them.

www.reproductiondecals.com/default_frame...nfo_events.html~main
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000

Please Log in or Create an account to join the conversation.

  • hocbj23
  • Visitor
13 May 2010 13:05 #367686 by hocbj23
Replied by hocbj23 on topic side cover emblems
They got em,but 42.50 for a side cover emblem?Holy Manuto,that seems a tad pricey.I guess it isnt if u gotta have one and cant find one though.bj

Please Log in or Create an account to join the conversation.

More
16 May 2010 20:03 #368414 by nedrowjoe
Replied by nedrowjoe on topic side cover emblems
thanks guys this forum kicks ass, a bit pricey but cheaper than most i found, 37 dollars with the conversion rate, to bad the dollar is so weak right now

Please Log in or Create an account to join the conversation.

More
16 May 2010 21:08 #368433 by mjg15
Replied by mjg15 on topic side cover emblems
I have to remove some for a repaint soon. I was thinking that if I had a problems removing the pins/washers I could drill holes and use a small countersunk screw (similar to most of the tank emblems) to reattach them. It would seem better than $40/ea for new ones.
'80 Z750fx
'81 KZ550A
'81 GPz550's, Too many!
'82 KZ1000R
'82 GPz750
'90 ZR550


Project photo album: s163.photobucket.com/albums/t289/mg15_ph...GPz-ZR550%20project/
s163.photobucket.com/albums/t289/mg15_ph...current=DSC01286.jpg

Please Log in or Create an account to join the conversation.

More
17 May 2010 11:20 #368530 by Jack
Replied by Jack on topic side cover emblems
The replacment sidecover badges are expensive but the quality is 2 X what the oem ones were. The material is much thicker and the paint is perfect.

And I'd hate to think of the oem Kawasaki list price at my local dealer...
79 KZ 1075 MKll
79 KZ 1500 MKll dragbike
Gone but not forgotten:
3 X 73 Z1's
1 X 74 Z1A
1 X 75 Z1B

Please Log in or Create an account to join the conversation.

More
18 Jul 2010 10:55 #383624 by Kidkawie
Replied by Kidkawie on topic side cover emblems
I was able to remove those lock washers by prying up on the washer with a very small flathead screwdriver then using a small set of dykes to cut a slit in them. Just pulled right off.

Where can you buy replacement washers?
1975 Z1 900
1994 KX250 Supermoto
2004 KX125

Please Log in or Create an account to join the conversation.

More
18 Jul 2010 10:57 #383626 by PLUMMEN
Replied by PLUMMEN on topic side cover emblems
ace hardware
Still recovering,some days are better than others.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links