new member with swap q's

  • Bock919
  • Bock919's Avatar Topic Author
  • Offline
  • User
  • Posts: 3
  • Thanks: 0

new member with swap q's

28 Aug 2006 06:12
#72940
Hey all! I just joined the forum in hopes of finding some answers to suspension swap questions.

My daily ride is a 2003 Honda 919, but I also have a 1983 kz440 ltd that is something of a project bike.

I'd like to put a beefier front end on the 440, but all the front end swaps that I saw on the forum when I searched were for the 650, Z1, or Z1100.

I also want to swap out the swingarm, preferable for a complete KZ650 rear end in order to obtain a rear disc to replace the rear drum of the 440.

The problems I'm going to run into I'm sure are many since the 440 has a single front disk, rear drum brake, and belt drive instead of chain drive.

Any comments, suggestions, etc. are very welcome. I know from reading through the forum that there are some very knowledgeable and experienced members here, so please share your wisdom.

Please Log in or Create an account to join the conversation.

  • rstnick
  • rstnick's Avatar
  • Offline
  • User
  • Posts: 4416
  • Thanks: 384

Re: new member with swap q's

28 Aug 2006 20:14
#73109
Welcome. I don't seem to remember much about 400/440 mods being discussed. Check in the Archives, as years of posts are in there.
As well, try www.kz400.com
Rob
CANADA

Need a key for your Kawasaki? PM me

1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s (aka GPz750)
1978 KZ1000 project

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum