Upgrading your steering stem bearings
- 650mod
-
Topic Author
- Offline
- User
- Posts: 569
- Thanks: 48
Upgrading your steering stem bearings
25 Oct 2012 19:58
Hey all,
I was over on the kz650.info site, and found a really nice link to a chart that tells you what needle taper bearings will fit the steering stem on the KZ's.
Upload the link below, and scroll down to the second last post- it's got a little link to an Adobe file that has needle bearing codes and what stems they will fit.
forums.kz650.info/index.php?topic=7161.0
Hope this saves everyone alot of time digging around looking for bearing codes/getting custom bearings made.
Devin
I was over on the kz650.info site, and found a really nice link to a chart that tells you what needle taper bearings will fit the steering stem on the KZ's.
Upload the link below, and scroll down to the second last post- it's got a little link to an Adobe file that has needle bearing codes and what stems they will fit.
forums.kz650.info/index.php?topic=7161.0
Hope this saves everyone alot of time digging around looking for bearing codes/getting custom bearings made.
Devin
78 kz 650 custom
Wiseco 720cc big bore
Dynajet stage 3 carb kit with pods
2002 Kawasaki Z750 exhaust
2001 Buell lightning front end
1999 Ninja 600 swingarm with 1999 Ninja 900 rear rim
converted to monoshock rear
Too many goodies to list fully
Wiseco 720cc big bore
Dynajet stage 3 carb kit with pods
2002 Kawasaki Z750 exhaust
2001 Buell lightning front end
1999 Ninja 600 swingarm with 1999 Ninja 900 rear rim
converted to monoshock rear
Too many goodies to list fully
Please Log in or Create an account to join the conversation.
- mark1122
-
- Offline
- User
- Keep twisting it
- Posts: 5359
- Thanks: 109
Re: Upgrading your steering stem bearings
25 Oct 2012 20:58 - 25 Oct 2012 21:02
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Last edit: 25 Oct 2012 21:02 by mark1122.
Please Log in or Create an account to join the conversation.
- 650mod
-
Topic Author
- Offline
- User
- Posts: 569
- Thanks: 48
Re: Upgrading your steering stem bearings
25 Oct 2012 22:18
I did not know that... Good call, Mark!
78 kz 650 custom
Wiseco 720cc big bore
Dynajet stage 3 carb kit with pods
2002 Kawasaki Z750 exhaust
2001 Buell lightning front end
1999 Ninja 600 swingarm with 1999 Ninja 900 rear rim
converted to monoshock rear
Too many goodies to list fully
Wiseco 720cc big bore
Dynajet stage 3 carb kit with pods
2002 Kawasaki Z750 exhaust
2001 Buell lightning front end
1999 Ninja 600 swingarm with 1999 Ninja 900 rear rim
converted to monoshock rear
Too many goodies to list fully
Please Log in or Create an account to join the conversation.
- steell
-
- Offline
- User
- Posts: 6850
- Thanks: 208
Re: Upgrading your steering stem bearings
26 Oct 2012 14:43
Same info is available here at KZR under the KZ Info tab at the top.
Along with tons of other good info.
Along with tons of other good info.
KD9JUR
Please Log in or Create an account to join the conversation.
- 893cv
-
- Offline
- User
- Posts: 201
- Thanks: 15
Re: Upgrading your steering stem bearings
26 Oct 2012 20:23
These folks have lots of steering head bearing information, and fork swap info too.
www.allballsracing.com/index.php/
www.allballsracing.com/index.php/
1980 kz1000 LTD
1978 Z1R
1978 Z1R
Please Log in or Create an account to join the conversation.