clip ons for a kz

anyone know what types of clipons are a direct bolt on for a kz1000 perticularly an 82 csr1000?

If you watch eBay, Jim Hinshaw is constantly marketing Tarozzi stuff. It's good quality and it is made to fit. Tarozzi also makes true quality bolt-on rear-sets for old school Kawasakis...not any of this Raask crap. (my appologies to those of you who have Raasks...but they're nasty). The Tarozzi stuff isn't that much more, but it's much better stuff.

Search it up on eBay...probably just use "clip ons" or something like that and if you can't find Jim (I think his user ID is 'jimhinshaw') drop me a line back and I'll find it for you...I've got him on as one of my 'favorite sellers' and I can find it for you. You could just contact him and I'm sure he'd have what you want immediately.

later,
-KR

PS> Post pics of your project!

PS2> Here is a link to one of his rear-sets sales; from there you could contact him: cgi.ebay.com/ebaymotors/Universal-Fixed-...dZ1QQsspagenameZWDVW

Post edited by: Bad Kaw, at: 2008/02/29 21:42

i was meaning the handlbar clipons:blush:

i like the ones he has listed for an z1000/1000R thanks for the link, i'll have to bookmark that one..

I bought these from Rockwallperformance on ebay.

cgi.ebay.com/ebaymotors/kz-h2-z1-kx-kh-z...dZ1QQsspagenameZWD1V

love 2 ride, what is that n your fork leg? Did you equip your bike with a ray gun??

those clip on's look great, how far do you need to drop you forks to get them on?

Naw, its just a camera.

I dropped the forks 2.25".

If you can see in the pics, there is a black line drawn on the fork tube above the clipon. That was the original position before lowering. So really only needed to drop maybe a half inch to an inch for the clipons to fit.

In case you don't already know, the stock
KZ1000 CSR has 38mm forks vs the 36mm of the earlier
1000's.

steell wrote:

In case you don't already know, the stock
KZ1000 CSR has 38mm forks vs the 36mm of the earlier
1000's.

your awsome steell!!