upside down fork fenders

  • mark1122
  • Topic Author
  • Offline
  • User
  • Keep twisting it
More
30 Dec 2007 10:43 #186942 by mark1122
upside down fork fenders was created by mark1122
im putting zx9 forks on my kz but dont like the fender. i need some help coming up with a possible doner.does anyone have some pics of a more conventional kz style fender that i could adapt. it would have to fit a 17" wheel.if i could find 1 from another bike i liked i could likely find 1 on ebay or a wrecker.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

More
01 Jan 2008 21:14 #187319 by gpznutt
Replied by gpznutt on topic upside down fork fenders
have you looked at what it would take to mount the stocker. Ive done the same mode on my 82 gpz and it doent take much of a braket to use the stocke but i gues its all in the look , mine just looks better with the original

Please Log in or Create an account to join the conversation.

  • mark1122
  • Topic Author
  • Offline
  • User
  • Keep twisting it
More
02 Jan 2008 15:19 #187404 by mark1122
Replied by mark1122 on topic upside down fork fenders
the stocker is for a 19" wheel and it doesnt look right on the 17" wheel.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

More
02 Jan 2008 17:40 #187423 by CruisingRam
Replied by CruisingRam on topic upside down fork fenders
mark1122 wrote:

the stocker is for a 19" wheel and it doesnt look right on the 17" wheel.


Not only that- the stocker fenders aren't typicaly wide enough either. You have to be prepared to do some fab work!
1975 Z1 B 900- soon to be heavily modded
Pahoa, Hawaii is my new hom
I am working hard to save up the shipping money to get my shop opened here in Hawaii
I hate electrical stuff.

Please Log in or Create an account to join the conversation.

More
03 Jan 2008 14:09 #187533 by gpznutt
Replied by gpznutt on topic upside down fork fenders
mine was for a 19 and it took some work but looks good worth it



[img

Please Log in or Create an account to join the conversation.

  • mark1122
  • Topic Author
  • Offline
  • User
  • Keep twisting it
More
03 Jan 2008 14:31 #187535 by mark1122
Replied by mark1122 on topic upside down fork fenders
Nice job. what did u have to do? where is Park Hill?
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

More
03 Jan 2008 16:01 #187546 by gpznutt
Replied by gpznutt on topic upside down fork fenders
go to my thread under Projects and parkhill is about dead center of london and sarnia 10 mins from Gand Bend

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links