Throttle Cables....
- RetroRiceRocketRider
-
- Offline
- User
- ...bring in the machine that goes PING!
- Posts: 1641
- Thanks: 29
Re: Throttle Cables....
17 Nov 2007 10:13
Lubing the cable prior to installing it, and then at least once year after that is a good habit.
Also don't forget to apply grease to the "barrels" on the ends of the cables, since this is usually what causes the cables to break = an ungreased "barrel" won't pivot like intended, and will cause the cable to bend in that area every time it's used, eventually causing the cable to break, and almost always when in traffic ("Murphy's Law" :pinch:).
Also don't forget to apply grease to the "barrels" on the ends of the cables, since this is usually what causes the cables to break = an ungreased "barrel" won't pivot like intended, and will cause the cable to bend in that area every time it's used, eventually causing the cable to break, and almost always when in traffic ("Murphy's Law" :pinch:).
78 KZ650-B2 = SOLD
84 ZN700 LTD = SOLD
84 ZX750 GPz = SOLD
89 GSX1100F Katana = SLEEPING
20 VN1700 Vulcan Vaquero (the Blue Cowboy)
Looking for my next project KZ
Please Log in or Create an account to join the conversation.