TOPIC:

I have been working over the winter to rebuild the bike and thought g it was time to do the wiring as you can see I need some guidance . I would love any pictures of where it all goes especially grounding wires. Any advice would be greatly appreciated.

My mistake. misinterpreted the question. doh.


...

I have copied the stock wiring as this is my first time and now need to put it on just need information about the way i t is fitted on the bike how and where to connect to the engine . Then I need to investigate what electronic ignition system would work with it

Electronic ignition. From memory >> comments by steel. you can use the electronic ignition from an 82-84 KZ750-M1/K1/K2 Twin. Also, most of the KZ440s have the same pulsing coil as the M1 but different advancer. I wouldn't buy an old, used ignition coil. Be sure to get a new engine cover gasket.

I don't know if there's an aftermarket elec ignition for the 750 Twin, so check Z1Enterprises.com to see what's available.

ps: if you stumble across any replies by steell or bountyhunter, take note as they know a lot about the 750 Twins.
...