Wiring Help

Hey Guys, I recently picked up a 1981 KZ750. There was no harness with the bike. I bought a 1982 KZ750LTD harness on eBay for dirt cheap. So far most of the main wiring works, but both LH & RH combo switches have different connectors. My main issue and I have looked at about 5 different wiring diagrams, I am trying to figure out what main wires I really need from the RH Combo switch to use the electric start. Ive looked online for 82-on RH control switches and they are pretty nonexistent. From looking at the E3 diagram which states it's for the 1982 it appears the starter button assembly only consists of 3 wires (black, red and yellow, which turns into a red/yellow). I am thinking i can get a universal switch with either 2 or 3 wires and figure out which two make the switch active. Thanks guys.

Try this website:
kz.bike-night.com/manual.html

Trying to figure out what this plug is for. Cannot seem to locate it on any of the schematics.... Thanks

I've got a switch and the correct harness for an 81 750Ltd along with some other assorted stuff for the same bike.

The Gringo wrote: I've got a switch and the correct harness for an 81 750Ltd along with some other assorted stuff for the same bike.

Really!!? How much would you like for the harness, and is it in decent condition? Thanks

No eBay APP ID and/or Cert ID defined in Kunena configurationNo eBay APP ID and/or Cert ID defined in Kunena configurationNo eBay APP ID and/or Cert ID defined in Kunena configurationI ordered new connectors for my loom.
Steve

Z1Enterprises.com has a pretty good selection of connectors & electricals including colored wire which would be handy.

CycleTerminal is another place that also has a good selection, but the guy is on vacation right now until Aug 1. The connector quality is pretty good & they seem to be exactly the same as stock, the ones I got anyway. I think they are made by oem mfgs.

They don't have them anymore.
Steve

Don't have what any more? If you mean the 9-pin, Cycleterminal has them in white, black or blue.

Z1E had them for the Z1/KZ 1000's. No more. I looked at that site, wrong style. I found the ones I showed and got them in 4 days. They have the other styles as well.
Steve

Thanks. Do you just not care for the style, or will those connectors not work with the stock terminal pins?

www.easternbeaver.com is another website with motorcycle electrical supplies.