replacement plug wires

More
13 Oct 2011 19:48 #483001 by bearshawk
replacement plug wires was created by bearshawk
Hey guys im working on my kz1100 and the plug wires are really stiff... i am going to get new coils and i am wondering what replacements there are for the OEM coils? they have the screw on caps with the litle needle looking thing the wires go onto... any help would be good
1978 kz650 sr- long time project/first bike mostly gone
1979 kz659 sr- new acquisition NEXT project GONE

Both 650s combined to make one great bike! with a new powerplant

it is a 79 frame, 78 front end, both 78 wheels and brakes, 78 body work and a 80' 750-4 motor with gpz 750 cams and a kerker and...

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Offline
  • User
  • FIX UP YOUR BIKE RIGHT AND CHEAP
More
13 Oct 2011 19:57 #483003 by Motor Head
Replied by Motor Head on topic replacement plug wires
It depends on the coils you buy, you might get wires, and caps. Then maybe you need to buy wires and caps, many choices. Which coils do you have your eye on?
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B...

Please Log in or Create an account to join the conversation.

More
13 Oct 2011 20:26 #483013 by MFolks
Replied by MFolks on topic replacement plug wires
Accel makes a popular 3 ohm ignition coil replacement, and so does Dyna in the 2.2 Grey and 3.0 ohm Green coils.

The Dyna coil accepts the popular 7mm sparkplug wires, where the Accel has terminals similar to the sparkplug ends.

Both of these coils will need new terminals crimped on the ends of the primary(small wires)sides as they take #10 ring terminals, and what came with the Kawasaki coils were 1/4" push on terminals.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

More
13 Oct 2011 20:31 #483015 by Patton
Replied by Patton on topic replacement plug wires

bearshawk wrote: Hey guys im working on my kz1100 and the plug wires are really stiff... i am going to get new coils and i am wondering what replacements there are for the OEM coils? they have the screw on caps with the litle needle looking thing the wires go onto... any help would be good


What ignition? Stock or Dyna-S or ???

Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

More
13 Oct 2011 20:33 #483016 by bearshawk
Replied by bearshawk on topic replacement plug wires
stock
1978 kz650 sr- long time project/first bike mostly gone
1979 kz659 sr- new acquisition NEXT project GONE

Both 650s combined to make one great bike! with a new powerplant

it is a 79 frame, 78 front end, both 78 wheels and brakes, 78 body work and a 80' 750-4 motor with gpz 750 cams and a kerker and...

Please Log in or Create an account to join the conversation.

More
13 Oct 2011 20:38 #483017 by Patton
Replied by Patton on topic replacement plug wires
What year KZ1100?

It's important to fit ignition coils with the proper resistance.

Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

More
13 Oct 2011 20:53 #483018 by bearshawk
Replied by bearshawk on topic replacement plug wires
1982 kz1100 A2 i just bought a replacement coil for the RT side, the lower plug tower (where the cap screws into) was broken
1978 kz650 sr- long time project/first bike mostly gone
1979 kz659 sr- new acquisition NEXT project GONE

Both 650s combined to make one great bike! with a new powerplant

it is a 79 frame, 78 front end, both 78 wheels and brakes, 78 body work and a 80' 750-4 motor with gpz 750 cams and a kerker and...

Please Log in or Create an account to join the conversation.

More
13 Oct 2011 21:07 #483020 by Patton
Replied by Patton on topic replacement plug wires
For possible consideration ---


www.z1enterprises.com/Dyna-Dual-Output-2...-pair-DC41-1306.aspx

www.z1enterprises.com/Ignition-Coil-Kawa...1100--2--3-1710.aspx

www.z1enterprises.com/Ignition-Coil-Kawa...1100--1--4-1711.aspx

Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

More
13 Oct 2011 21:11 #483021 by bearshawk
Replied by bearshawk on topic replacement plug wires
i saw those but i dont really want to spend 160 bucks until i know the coils are bad... if i get this replacement, i got it pretty cheap, and there is no imporvement i will spring for those. so far im still under $500 for the entire investment in the bike

for these coils is there really no way to replace just the wires?
1978 kz650 sr- long time project/first bike mostly gone
1979 kz659 sr- new acquisition NEXT project GONE

Both 650s combined to make one great bike! with a new powerplant

it is a 79 frame, 78 front end, both 78 wheels and brakes, 78 body work and a 80' 750-4 motor with gpz 750 cams and a kerker and...

Please Log in or Create an account to join the conversation.

More
13 Oct 2011 21:54 #483033 by Patton
Replied by Patton on topic replacement plug wires
The coils do seem to outlast their permanently affixed spark plug wires.

While never having tried to replace the permanently affixed type spark plug wires, there is a "splicer" available for this purpose.

spark plug wire splicer at Z1E

Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Offline
  • User
  • FIX UP YOUR BIKE RIGHT AND CHEAP
More
13 Oct 2011 21:54 #483034 by Motor Head
Replied by Motor Head on topic replacement plug wires
If you have the Stock Kawasaki Coils on your 1100, then the wires should be replaceable.
Have you got ypou OHM meter out to Measure whats what with the coils? Checked the supply voltage to the coils from the Ignition switch? Voltage may be low causing weak spark.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B...

Please Log in or Create an account to join the conversation.

More
14 Oct 2011 00:25 #483059 by bearshawk
Replied by bearshawk on topic replacement plug wires
i am horrible with electronics.... i honestly dont know where to begin with this procedure, i have a multimeter but barely know how to use it
1978 kz650 sr- long time project/first bike mostly gone
1979 kz659 sr- new acquisition NEXT project GONE

Both 650s combined to make one great bike! with a new powerplant

it is a 79 frame, 78 front end, both 78 wheels and brakes, 78 body work and a 80' 750-4 motor with gpz 750 cams and a kerker and...

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links