Old big pin terminals to the new smaller pins

  • Proxy
  • Topic Author
  • Offline
  • User
  • 80% Human 20% Nuts/Bolts
More
06 Apr 2011 10:43 #442958 by Proxy
Old big pin terminals to the new smaller pins was created by Proxy
Does anyone know if there are any connectors that allow those of us who have the big old pin terminals connect to the newer smaller pin terminals? I can't seem to locate any and I hate to just re-solder them all. Replaced directionals and back light and they all came with the new little connectors. Mostly it would be big female end converting to little female end to accept small male end. Starting to sound dirty but I assure you I have cleaned the ends....:pinch:
Take it from me cuz I found
If you leave it then somebody else is bound,
To find that treasure, that moment of pleasure,
When yours, it could have been.
1977 KZ650 B1 Being restored to original (Green)
1977 KZ650 B1 Original (Red) Sold
1977 KZ650 B1 Donor Bike for Parts

Please Log in or Create an account to join the conversation.

  • TeK9iNe
  • Offline
  • User
  • What did you do!?!
More
06 Apr 2011 13:55 #442987 by TeK9iNe
Replied by TeK9iNe on topic Old big pin terminals to the new smaller pins
Whip out the soldering gun/iron and get to work ;)

B)
Motorcycle Shop Owner/Operator

79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors ;)

Please Log in or Create an account to join the conversation.

  • Proxy
  • Topic Author
  • Offline
  • User
  • 80% Human 20% Nuts/Bolts
More
06 Apr 2011 17:53 #443037 by Proxy
Replied by Proxy on topic Old big pin terminals to the new smaller pins
Geese Tek9 ya sound like OCD Paul Turrtle Sr. Now go put your big feet up on the desk. I kinda figured that was THE answer. ;) Funny I don't mind cleaning terminals but I hate cutting perfectly good ones off just to solder a different size one on. Thanks Tek! ;)
Take it from me cuz I found
If you leave it then somebody else is bound,
To find that treasure, that moment of pleasure,
When yours, it could have been.
1977 KZ650 B1 Being restored to original (Green)
1977 KZ650 B1 Original (Red) Sold
1977 KZ650 B1 Donor Bike for Parts

Please Log in or Create an account to join the conversation.

  • mark1122
  • Offline
  • User
  • Keep twisting it
More
06 Apr 2011 19:18 #443067 by mark1122
Replied by mark1122 on topic Old big pin terminals to the new smaller pins
i think u can get new pins from Z1E.
Have a look see.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

More
06 Apr 2011 19:29 #443070 by MFolks
Replied by MFolks on topic Old big pin terminals to the new smaller pins
See what www.easternbeaver.com has, also:
www.vintageconnections.com
www.electricalconnection.com
www.electricalconnection.com/electrical-components/hitachi.htm
www.crowbarelectricalparts.com/butt_connectors.htm
www.rallylights.com
www.ironbutt.org/forum/forum_posts.asp?TID=1759&PN=1
www.ratwell.com/technical/Terminals.html
www.economycycle.com/servlet/the-Bullet-...lectrical/Categories
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links