1000 j flywheel

I'm working on a KZ1000 j motor for a neighbor of mine and while I was removing the flywheel I decided to give the bolt I was using to remove the flywheel a good tap with a hammer. I missed the bolt and struck the flywheel (DOH!!). Long story short I broke the magnets in the fly wheel and now I need to buy a new one. My question is are all of the 1000 j motor fly wheels the same?? Can i just buy one on ebay?? Any advice?? Thanks in advance.

They should be all the same, but check with the engine builders/machine shops:

www.aperaceparts.com
www.bore-tech.com
www.flowbenchtech.com (Cavenaugh Racing Heads)
www.fastbygast.com
www.grccranks.com
www.schnitzracing.com
www.valleyspeed.ca/services.html
www.carolinacycle.net/index.php?option=c...ex&Itemid=3&catID=84
www.maxrpms.net/shop/

Sweet, thanks.

This is a list of models all using the same rotor...came from the Mother Kawasaki site...the part is still available new and I suspect there a bunch of used ones around.



Model (37):
KZ1000-J1 (1981)
KZ1000-J2 (1982)
KZ1000-J3 (1983)
KZ1000-K1 (LTD) (1981)
KZ1000-K2 (LTD) (1982)
KZ1000-M1 (CSR) (1981)
KZ1000-M2 (CSR) (1982)
KZ1000-P1 (Police 1000) (1982)
KZ1000-P10 (Police 1000) (1991)
KZ1000-P11 (Police 1000) (1992)
KZ1000-P12 (Police 1000) (1993)
KZ1000-P13 (Police 1000) (1994)
KZ1000-P14 (Police 1000) (1995)
KZ1000-P15 (Police 1000) (1996)
KZ1000-P16 (Police 1000) (1997)
KZ1000-P17 (Police 1000) (1998)
KZ1000-P18 (Police 1000) (1999)
KZ1000-P19 (Police 1000) (2000)
KZ1000-P2 (Police 1000) (1983)
KZ1000-P20 (Police 1000) (2001)
KZ1000-P3 (Police 1000) (1984)
KZ1000-P4 (Police 1000) (1985)
KZ1000-P5 (Police 1000) (1986)
KZ1000-P6 (Police 1000) (1987)
KZ1000-P7 (Police 1000) (1988)
KZ1000-P8 (Police 1000) (1989)
KZ1000-P9 (Police 1000) (1990)
KZ1000-R1 (Eddie Lawson Replica) (1982)
KZ1000-R2 (Eddie Lawson Replica) (1983)
KZ1100-A1 (Shaft) (1981)
KZ1100-A2 (Shaft) (1982)
KZ1100-A3 (Shaft) (1983)
KZ1100-B1 (GPz) (1981)
KZ1100-B2 (GPz) (1982)
KZ1100-D1 (Spectre) (1982)
KZ1100-D2 (Spectre) (1983)
KZ1100-L1 (LTD Shaft) (1983)