- Posts: 1183
- Thank you received: 50
Clear Float Bowls...
- guitargeek
-
- Offline
- User
- Elitist, arrogant, intolerant, self absorbed.
- rstnick
-
- Offline
- User
29 Nov 2013 02:13 - 29 Nov 2013 02:14 #614351
by rstnick
I know!
Noticed there are no overflows on those ebay ones.
Better hope all is working well, float needle and seat, so carbs don't flood out the engine.
Those clear bowls would go with the clear points cover I have.
Rob
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R
2005 z750s
Replied by rstnick on topic Clear Float Bowls...
anybody here know what 3D printing is?
I know!
Noticed there are no overflows on those ebay ones.
Better hope all is working well, float needle and seat, so carbs don't flood out the engine.
Those clear bowls would go with the clear points cover I have.
Rob
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R
2005 z750s
Last edit: 29 Nov 2013 02:14 by rstnick.
Please Log in or Create an account to join the conversation.
- Sorf
-
- Offline
- User
30 Nov 2013 22:26 #614506
by Sorf
Replied by Sorf on topic Clear Float Bowls...
There is this set on ePay. Not sure if it's what your after?....
Pic is link
Pic is link
Please Log in or Create an account to join the conversation.
- sbc1320
-
- Offline
- User
01 Dec 2013 06:26 #614512
by sbc1320
I believe they belong to a member on here as there is a thread about these somewhere else.
1980 KZ1000 LTD-B4(MK II engine) - Progressive suspension, MTC pistons, Dynojet Stage III, all wear items replaced, WFO paint scheme(1978), etc..
Past bikes- 2 1976 Kz900's, 5 1975-76 Honda CB750's, Honda 500 -4, Honda 250, Honda 125, Honda 100, Suzuki RM 250, Honda XL350, Kawasaki KLR 650, etc..
Replied by sbc1320 on topic Clear Float Bowls...
Sorf wrote: There is this set on ePay. Not sure if it's what your after?....
Pic is link
I believe they belong to a member on here as there is a thread about these somewhere else.
1980 KZ1000 LTD-B4(MK II engine) - Progressive suspension, MTC pistons, Dynojet Stage III, all wear items replaced, WFO paint scheme(1978), etc..
Past bikes- 2 1976 Kz900's, 5 1975-76 Honda CB750's, Honda 500 -4, Honda 250, Honda 125, Honda 100, Suzuki RM 250, Honda XL350, Kawasaki KLR 650, etc..
Please Log in or Create an account to join the conversation.
- KZQ
-
- Offline
- Administrator
- Walking Behind the Corn May Not Be All That!
- KZQ
-
- Offline
- Administrator
- Walking Behind the Corn May Not Be All That!
- rstnick
-
- Offline
- User
01 Dec 2013 14:33 - 01 Dec 2013 14:53 #614551
by rstnick
No Bill, I bought the clear cover off ebay UK.
No need for it to be liquid tight on the 650s, as there is no liquid/oil behind that cover.
As far as for keeping rain out, I guess the cover does do that, but I have seen a vented points cover (custom made) on another 650. He hade it vented to help cool the electronic ignition pick ups as they seemed to over heat.
Clear cover;
Vented cover, a little hard to see, but there is a scoop on the front side, and holes in the rear;
Rob
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R
2005 z750s
Replied by rstnick on topic Clear Float Bowls...
KZCSI wrote: Hi rstnick,
Are you saying that that clear points cover is a print job? I'm pretty familiar with 3D printing but have never seen a print that would be liquid tight.
Bill
No Bill, I bought the clear cover off ebay UK.
No need for it to be liquid tight on the 650s, as there is no liquid/oil behind that cover.
As far as for keeping rain out, I guess the cover does do that, but I have seen a vented points cover (custom made) on another 650. He hade it vented to help cool the electronic ignition pick ups as they seemed to over heat.
Clear cover;
Vented cover, a little hard to see, but there is a scoop on the front side, and holes in the rear;
Rob
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R
2005 z750s
Last edit: 01 Dec 2013 14:53 by rstnick.
Please Log in or Create an account to join the conversation.