Help - Carb parts needed for my 75 KZ400

Hi ya'll...I am bummed out. MY 75 KZ400 is in the shop and need her carbs rebuilt with the following parts:
KA 713850 16015-007 SPRING,PILOT ADJ SCR 2.92 2 2 NLA
KA 713850 16038-011 "O" RING,PILOT SCREW 2.24 2 2 NLA
KA 713850 16038-013 "O" RING MAIN JET 2.64 2 2 NLA
KA 713850 16039-021 WASHER,PLAIN,3.6MM 1.36 2 2 NLA
KA 713850 92055-1003 "O" RING,DRAIN SCREW - N.L.A. 2.15 2 2 NLA
KA 713850 92064-043 PILOT JET,#35 6.38 2 2 NLA

And my mechanic says the parts are no longer available. Can you suggest a good after market parts replacement? Any suggestions are welcome. I am so sad.....

Zoo

Here is a start... www.z1enterprises.com/detail.aspx?ID=1869

Thank you - I passed along the info.

Sounds like you need the complete rebuild kit

rise from your grave. I have the same problem with my carburetors missing the pilot jet and rubber plug Z1 enterprises doesn't have them jets R Us doesn't have them so I'm in the same boat is there any way for me to make the rubber plug and not use the pilot jet since it is stacked on top of a #35 slow jet. Guy on eBay got a used 1 for $35!! I need 2!! Help me out KZR

Anyone know of any company the can make jets?? These jets aren't available anywhere online.

Siriusconic consolidated appear to have the jet kits for the 74 75 and from the website it looks like there's a lot of bits in the kit.
www.siriusconinc.com/search_result.php?m...12&y=7&search=search
take a look. What you need might be in there

Try Sudco International www.sudco.com they should have what you need.

neither of those companies have the jets i need!!!!think i'm screwed here for sure.
i gotta get a digital caliber to measure these damn pilot jets!!!!! if i find the right thread size but its a little taller could it still work?

well i found one used and one n.o.s. from a vintage repair shop out in ohio. 25 bucks shipped. Reallyneed to look into reporoducing these damn jets, might be a market for them.

I remember swapping jets from a Honda CL350 into some 1976 KZ400 carbs. They were notidentical, but they were very similar and worked great.

Man I never found that on the net after almost a week of searching. Good info, wish I had known before dropping 25 bucks on this new/used set. Oh well, got another set, if I ever get around to drilling the pilots out to try those cl350 jets on.