Manifold clamps

More
02 Apr 2008 10:19 #203736 by 77_650B1
Manifold clamps was created by 77_650B1
Hey guys, does anywhere know wher to get those clamps that are on the rubber manifolds? Mine suffer from years of people over-tightening them, and I dont think they're doing a very good job anymore.
1977 KZ650-B1
-Dual Discs
-Dyna-S
-WG Coil Mod
-Alloy Wheels

Please Log in or Create an account to join the conversation.

More
02 Apr 2008 11:07 #203745 by wiredgeorge
Replied by wiredgeorge on topic Manifold clamps
Try eBay or Z1Enterprises.com
wiredgeorge Motorcycle Carburetors
Mico TX
www.wgcarbs.com
Too many bikes to list!

Please Log in or Create an account to join the conversation.

More
02 Apr 2008 11:13 #203747 by 77_650B1
Replied by 77_650B1 on topic Manifold clamps
Thanks WG. Z1 doesn't have em, guess its on the list of things to find on ebay this summer.
1977 KZ650-B1
-Dual Discs
-Dyna-S
-WG Coil Mod
-Alloy Wheels

Please Log in or Create an account to join the conversation.

More
02 Apr 2008 13:03 #203762 by ronjones
Replied by ronjones on topic Manifold clamps
Can't you just use the stainless hose clamps, you can get at pretty much any harwarestore?
'82 KZ750 CSR, M1 twin. Mac 2-1 exhaust, K&N pods, 17tooth drive sprocket, Mikuni BS-34 carbs w/#47.5 pilot jet and #125 main jet, Canadian XS650 needlejetjet needle, Wired George's coil mod.
Barrak, Nancy and Harry says: Welcome to the United Soviet States of America, Comrades

Please Log in or Create an account to join the conversation.

More
02 Apr 2008 13:13 #203771 by 77_650B1
Replied by 77_650B1 on topic Manifold clamps
i can...but i'd rather not, theres not much space in there for fiddling, and the stock style ones are easier to tighten in that situation
1977 KZ650-B1
-Dual Discs
-Dyna-S
-WG Coil Mod
-Alloy Wheels

Please Log in or Create an account to join the conversation.

  • KZ_Rage
  • Offline
  • User
  • Kentucky Bourbon Barrel Ale
More
02 Apr 2008 13:15 #203773 by KZ_Rage
Replied by KZ_Rage on topic Manifold clamps
They're on eBay almost every day cheap. The ones you have that bad? (photo's?)
1979 KZ1000E1 SOLD!
1984 KZ550F2 SOLD!
2006 ZG1000A6F (Totaled)
2001 ZRX1200R (Sold)
2001 Sprint 955i ST (daily rider)

Please Log in or Create an account to join the conversation.

More
02 Apr 2008 13:18 #203775 by 77_650B1
Replied by 77_650B1 on topic Manifold clamps
Oh, ok, I'll be able to get them on eBay then. Mine are horrible, one or two have stretched out so that when you have the screw all the way tight, its only tightening the manifold a little bit, not enough.
1977 KZ650-B1
-Dual Discs
-Dyna-S
-WG Coil Mod
-Alloy Wheels

Please Log in or Create an account to join the conversation.

More
02 Apr 2008 16:59 #203821 by 650ed
Replied by 650ed on topic Manifold clamps
I believe they're part #92037-178; find them NOS here:

Clamp
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

More
02 Apr 2008 18:04 #203834 by 77_650B1
Replied by 77_650B1 on topic Manifold clamps
Nice, thanks
1977 KZ650-B1
-Dual Discs
-Dyna-S
-WG Coil Mod
-Alloy Wheels

Please Log in or Create an account to join the conversation.

More
02 Apr 2008 18:09 #203837 by Bluemeanie
Replied by Bluemeanie on topic Manifold clamps
Pretty good, $2.46 ea. I saved that site in my favorites. Thanks 650ed!
1980 KZ650F1, Bought new out the door for $2,162.98!

Please Log in or Create an account to join the conversation.

More
02 Apr 2008 18:42 #203845 by gpzinfested
Replied by gpzinfested on topic Manifold clamps
Z1 lists alot of parts on their website but their are a lot more parts that is'nt on the website so sometimes you have to call them and ask and if they don't have them in stock I imagine they can get them.

Please Log in or Create an account to join the conversation.

  • KZ_Rage
  • Offline
  • User
  • Kentucky Bourbon Barrel Ale
More
02 Apr 2008 19:05 #203854 by KZ_Rage
Replied by KZ_Rage on topic Manifold clamps
That's odd, Zedder lists the OEM part number for all the big 4's and the one for your 650 as good for both bikes but Kaw's site doesn't have it as an interchange. I wonder what the difference is between the 650's and 900 &1000's?

Motorcycle parts outlet doesn't list the OEM part number for the big 4's clamp. Tried some carb parts too and no luck. Maybe you'd have to call them like Z1.
1979 KZ1000E1 SOLD!
1984 KZ550F2 SOLD!
2006 ZG1000A6F (Totaled)
2001 ZRX1200R (Sold)
2001 Sprint 955i ST (daily rider)

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links