- Posts: 20
- Thank you received: 0
hi guys back again advise please
- Brown
- Topic Author
- Offline
- User
Less
More
09 Nov 2006 12:56 #90789
by Brown
hi guys back again advise please was created by Brown
[/b]:blush: can any you guys out there recommend a good machine shop that do good work and had work done there want to have the shop install and fine deck for 1200 cc wise kit w/sleeve;)
Please Log in or Create an account to join the conversation.
- Duck
- Offline
- User
- e vica na i sau na ga
09 Nov 2006 13:11 #90793
by Duck
Replied by Duck on topic hi guys back again advise please
If you're in Atlanta, Willy's is good.
Please Log in or Create an account to join the conversation.
- Brown
- Topic Author
- Offline
- User
Less
More
- Posts: 20
- Thank you received: 0
09 Nov 2006 14:42 #90825
by Brown
Replied by Brown on topic hi guys back again advise please
hi duck
i'am about 3hrs from atlanta send me some more info and i'll contact him i'am over in alabama,huntsville is him rates reasonable for install sleeves honing deck and finishing cylinder look forward to hear from you duck and thanks alot;) :woohoo:
i'am about 3hrs from atlanta send me some more info and i'll contact him i'am over in alabama,huntsville is him rates reasonable for install sleeves honing deck and finishing cylinder look forward to hear from you duck and thanks alot;) :woohoo:
Please Log in or Create an account to join the conversation.
- btchalice
- Offline
- User
Less
More
- Posts: 760
- Thank you received: 7
09 Nov 2006 15:46 #90836
by btchalice
Terry Meyer / Wichita KS
76 kz900 w/1000 motor TWZTD
I am not driving too fast, I'm flying too low.
Replied by btchalice on topic hi guys back again advise please
that kind of funny im flying to huntsville next weekend
Terry Meyer / Wichita KS
76 kz900 w/1000 motor TWZTD
I am not driving too fast, I'm flying too low.
Please Log in or Create an account to join the conversation.
- Duck
- Offline
- User
- e vica na i sau na ga
09 Nov 2006 16:06 #90842
by Duck
Replied by Duck on topic hi guys back again advise please
Sorry, not Willy's but Will's
Address and phone here .
Shop is in the center of the photo here. You can zoom out for street names.
They do a lot of British bike and auto race engines. As with any machine shop, ask all your questions before they do the work!
Post edited by: Duck, at: 2006/11/09 19:09
Address and phone here .
Shop is in the center of the photo here. You can zoom out for street names.
They do a lot of British bike and auto race engines. As with any machine shop, ask all your questions before they do the work!
Post edited by: Duck, at: 2006/11/09 19:09
Please Log in or Create an account to join the conversation.
- wireman
- Visitor
09 Nov 2006 17:56 #90875
by wireman
Replied by wireman on topic hi guys back again advise please
something about auto machine shop in name worries me;)
Please Log in or Create an account to join the conversation.
- mark1122
- Offline
- User
- Keep twisting it
Less
More
- Posts: 5359
- Thank you received: 109
09 Nov 2006 22:11 #90939
by mark1122
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Replied by mark1122 on topic hi guys back again advise please
I gives me the willies:woohoo:
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- APE Jay
- Offline
- Banned
Less
More
- Posts: 1403
- Thank you received: 58
09 Nov 2006 23:51 #90957
by APE Jay
Replied by APE Jay on topic hi guys back again advise please
Brown wrote:
Give me a few minutes and I am sure I can think of one:lol:
Jay
[/b]:blush: can any you guys out there recommend a good machine shop that do good work and had work done there want to have the shop install and fine deck for 1200 cc wise kit w/sleeve;)
Give me a few minutes and I am sure I can think of one:lol:
Jay
Please Log in or Create an account to join the conversation.