Pig of a neutral.

  • davido
  • davido's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 1602
  • Thanks: 304

Re: Pig of a neutral.

04 Apr 2017 07:25
#758449
Aha! I just had a word with my local 'Yoda' and he reckons that it could be down to the oil.I was recommended to run the new pistons in with cheap mineral oil for 500km+- before switching to a good semisynthetic.
Just have another 420km to do (with a sticky neutral) then Ill know!
www.kzrider.com/forum/11-projects/594313-csr1000-project-build
CB550 (1978)
CB500/4 (1972)*
KZ1000CSR (1981)
XT 600E (1999)
TDM900 (2003)

Please Log in or Create an account to join the conversation.

  • davido
  • davido's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 1602
  • Thanks: 304

Re: Pig of a neutral.

06 Apr 2017 03:28 - 06 Apr 2017 03:32
#758597
Aha again! Just had a talk with another local and he reckons that sometimes a clutch basket will get notched, over time,where the teeth on the plates slam into the grooves. This notching can make getting into neutral a bit of a pig!
So,that gives me a lot to think about.
1, Incorrect spacing of the slave cylinder
2,Warped plates/knackered springs
3,Bad oil
4,Notched basket.
www.kzrider.com/forum/11-projects/594313-csr1000-project-build
CB550 (1978)
CB500/4 (1972)*
KZ1000CSR (1981)
XT 600E (1999)
TDM900 (2003)
Last edit: 06 Apr 2017 03:32 by davido.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum