- Posts: 164
- Thank you received: 6
exhaust installation kit from z1
- crusierlover
- Topic Author
- Offline
- User
Less
More
13 Feb 2014 15:14 #622148
by crusierlover
Proud owner of 1982 650csr again soon. keeping it this time
exhaust installation kit from z1 was created by crusierlover
I got the kit in the mail.havent opened it yet.It is going to be 75 degrees here tomorrow.I do not see any copper washers so far.Do I have to buy 4 crush washers to install exhausts plus the kit? its 81 kz 1000.I doubt our parts boy here in denton would have a clue what i am talking about.
Proud owner of 1982 650csr again soon. keeping it this time
Please Log in or Create an account to join the conversation.
- kaw-a-holic
- Offline
- User
Less
More
- Posts: 1808
- Thank you received: 249
13 Feb 2014 17:06 #622153
by kaw-a-holic
Jon
1977 KZ1000a1
Mesa, AZ
Phoenix Fighter Project
Replied by kaw-a-holic on topic exhaust installation kit from z1
I would install new crush washers if it were mine. Did you call Z1 and ask if they were supposed to come with the kit?
Jon
1977 KZ1000a1
Mesa, AZ
Phoenix Fighter Project
Please Log in or Create an account to join the conversation.
- crusierlover
- Topic Author
- Offline
- User
Less
More
- Posts: 164
- Thank you received: 6
13 Feb 2014 18:00 #622161
by crusierlover
Proud owner of 1982 650csr again soon. keeping it this time
Replied by crusierlover on topic exhaust installation kit from z1
I am at work.Will do that tomorrow.On their site it doesnt show any.
Proud owner of 1982 650csr again soon. keeping it this time
Please Log in or Create an account to join the conversation.
- sbc1320
- Offline
- User
Less
More
- Posts: 373
- Thank you received: 38
14 Feb 2014 12:46 - 14 Feb 2014 12:47 #622240
by sbc1320
1980 KZ1000 LTD-B4(MK II engine) - Progressive suspension, MTC pistons, Dynojet Stage III, all wear items replaced, WFO paint scheme(1978), etc..
Past bikes- 2 1976 Kz900's, 5 1975-76 Honda CB750's, Honda 500 -4, Honda 250, Honda 125, Honda 100, Suzuki RM 250, Honda XL350, Kawasaki KLR 650, etc..
Replied by sbc1320 on topic exhaust installation kit from z1
With the good weekend and if wanting to ride, I would put that header on there and tighten it down. It's not that big of a deal to take it back off and beats having to wait for parts if that is all you need.
You can also put a bead of some good RTV on each pipe and install it. A lot of the Mustang guys(not me, I am Chevy) use the red RTV on their exhaust connections with good success.
You can also put a bead of some good RTV on each pipe and install it. A lot of the Mustang guys(not me, I am Chevy) use the red RTV on their exhaust connections with good success.
1980 KZ1000 LTD-B4(MK II engine) - Progressive suspension, MTC pistons, Dynojet Stage III, all wear items replaced, WFO paint scheme(1978), etc..
Past bikes- 2 1976 Kz900's, 5 1975-76 Honda CB750's, Honda 500 -4, Honda 250, Honda 125, Honda 100, Suzuki RM 250, Honda XL350, Kawasaki KLR 650, etc..
Last edit: 14 Feb 2014 12:47 by sbc1320.
Please Log in or Create an account to join the conversation.