Machine shop

  • spudbudy
  • Topic Author
  • Offline
  • User
  • Kick it like you mean it
More
20 Jan 2013 21:29 #568373 by spudbudy
Machine shop was created by spudbudy
Hello, I'm in the Chicago area and I'm looking for a machine shop to do the
head on my 78 KZ650. I want new valve guides and the valves and seats cut.
I've tried Redline and they don't do them. No time. So any other shops around
here that can do a simply valve job?
78 KZ 650B2. Vetter faring, Dyna S, Dyna Green coils, WG coil mod,AGM Battery, VM26SS carbs, Pilot jet 15, mains 110, jet clip #2 shimmed position, Modified stock air box, stock air filter, Kerker 4 into 1 with stock baffle. currently 48,785 miles. :-) and climbing daily.:-)

Please Log in or Create an account to join the conversation.

More
20 Jan 2013 21:33 #568375 by Old Man Rock
Replied by Old Man Rock on topic Machine shop
PM Saxjonz..... He lives in Chicago and would be able to provide info...
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

  • spudbudy
  • Topic Author
  • Offline
  • User
  • Kick it like you mean it
More
20 Jan 2013 21:35 #568377 by spudbudy
Replied by spudbudy on topic Machine shop
Thanks I give him a try
78 KZ 650B2. Vetter faring, Dyna S, Dyna Green coils, WG coil mod,AGM Battery, VM26SS carbs, Pilot jet 15, mains 110, jet clip #2 shimmed position, Modified stock air box, stock air filter, Kerker 4 into 1 with stock baffle. currently 48,785 miles. :-) and climbing daily.:-)

Please Log in or Create an account to join the conversation.

More
20 Jan 2013 21:49 #568380 by Old Man Rock
Replied by Old Man Rock on topic Machine shop
Bluej58 as well.... In the area.... ;)
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

  • spudbudy
  • Topic Author
  • Offline
  • User
  • Kick it like you mean it
More
20 Jan 2013 21:51 #568381 by spudbudy
Replied by spudbudy on topic Machine shop
PM sent to Saxjonz
78 KZ 650B2. Vetter faring, Dyna S, Dyna Green coils, WG coil mod,AGM Battery, VM26SS carbs, Pilot jet 15, mains 110, jet clip #2 shimmed position, Modified stock air box, stock air filter, Kerker 4 into 1 with stock baffle. currently 48,785 miles. :-) and climbing daily.:-)

Please Log in or Create an account to join the conversation.

More
21 Jan 2013 03:35 #568471 by APE Jay
Replied by APE Jay on topic Machine shop
There is an outfit out in Calif. that is just a UPS box away.
www.KZzone.com

Please Log in or Create an account to join the conversation.

  • wireman
  • Offline
  • User
  • The most interesting prick in the world
More
21 Jan 2013 04:01 #568478 by wireman
Replied by wireman on topic Machine shop
Ill be in carmel/monterrey weds for 2 weeks,I need to figure out which direction that place is from there so I can take a tour.I wonder if they'll let me in?
Ill tell em Im OMR,then they'll let me in! :woohoo:
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

More
21 Jan 2013 09:21 #568486 by Old Man Rock
Replied by Old Man Rock on topic Machine shop
Well hell, as much $$$ I've spent on APE parts you should get the RED carpet treatment Plum.... :whistle:

Better yet, Jay will fly you out on his corporate jet.... :woohoo:
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

  • bluej58
  • Offline
  • Sustaining Member
  • The chrome don't get you home
More
21 Jan 2013 10:58 - 21 Jan 2013 12:27 #568490 by bluej58
Replied by bluej58 on topic Machine shop
No place local that "I" know of but you should look up and PM LarryC or APE Jay from this forum .
Both have top notch machine shops, I've heard good things ;)
Be careful who you go to , and don't trust a automotive shop .

JD
78 KZ1000 A2A
Last edit: 21 Jan 2013 12:27 by bluej58.

Please Log in or Create an account to join the conversation.

  • DoubleDub
  • Visitor
21 Jan 2013 14:34 - 21 Jan 2013 14:34 #568508 by DoubleDub
Replied by DoubleDub on topic Machine shop
Here's the APE Cylinder Head info page: aperaceparts.com/mailers/heads.html

And the Cavanaugh Racing Heads page: www.cavanaughracing.com/
Last edit: 21 Jan 2013 14:34 by DoubleDub.

Please Log in or Create an account to join the conversation.

More
21 Jan 2013 21:31 #568559 by DFIGPZ
Replied by DFIGPZ on topic Machine shop
LARRY CAVANAUGH .
1984 750 Turbo
The following user(s) said Thank You: wireman

Please Log in or Create an account to join the conversation.

More
21 Jan 2013 21:58 #568563 by LarryC
Replied by LarryC on topic Machine shop
Play it smart and check with z1e for valve availability first. Just in case
you need them.
Larry C.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links