turbo install question

I read some of the past articles on turboing a kz900/1000 and was wondering how a t-3 42ar turbo would work on a stock very tight low milage 900??? I would run low boost of course not to blow the bottom end out either. As for the carbs; could I jet the crap out of the 26's to save $$$ or just buy a 42 mik?

The oil question? Could I just run from the oil cooler to the turbo back to the block or do I have to fab up a crazy sump from the pan area?

I just thought this could be cool project. I have access to the turbo and can fab myself. I know about the timing and fuel also.

Who all is from omaha????
Nate 402-932-5307....

omaha,wheres that from bellevue?:whistle: :woohoo: theres a few of us here!

T3s don't work too well on bikes, the turbine is too large unless coupled with a T4 compressor on a 400hp monster. If you want a cheap turbo to suit a 900 with 200hp capability look for a T25. Blowing through the stock carbs is almost certainly a bad idea too, it can be done but it is a total pain in the ass to get right. Go for a draw through HSR42 Mikuni or EFI.

Sounds good I will keep that in mind. This is why; "its good to ask before you do"

Bellevue?????:whistle: Just want to know who to hang with and parts and also just bull with.

im 3 blocks south of omaha here in bellevue. louisville is about 20-30 miles depending on what part of omaha youre in.

Yeah,

Im from Bellevue also. Right of 25th street.:whistle:

30th and josephine!

I think I can hear a kaw in the pasture:woohoo:

the 2 i have up here are torn to pieces,thats why i keep stuff down south at my dads place in arkansas makes it harder to tear things apart!:S :woohoo: wait till world of wheels next spring,these 2 will be running and ill be working on the red 78 a2 that i took apart back in 87:evil:

brokekz, don't let him fool you.

he just takes them apart, and shows off old pics of them when they were still together. 8^)

omaha here as well, not a bellevue resident, but up north off of w/maple.

on topic, re the turbo: the hsr works great on a draw thru(same's mine), but ultimately i want to build injected/turbo'd kz.

i have ideas, plans, and absolutely NO time to start that project right now.

--r

thats why i told ya i didnt want to bring the z1 back to town,i told ya i would turn it into a pile of parts,some of which are on your garage floor,some sitting over at trail performance,some at joes machine,lots of stuff at omaha antique and job plating,some parts under the bed,some parts in closet.hey whats griz and ptersaur doing ing my closet? :S skipper76 just left i put his rear brake caliper together and showed him how to do fronts .maybe now i can concentrate on some of my stuff.oh yeah have you started on my frame yet,have you started on my frame yet?..........

all right now ,its full speed ahead now the gauntlet has been thrown down.im off to joes machine!:evil: