1982 KZ 1000J Cylinders/Pistons

  • darlington
  • Topic Author
  • Offline
  • User
  • S. Darlington
More
23 Oct 2012 20:07 - 23 Oct 2012 20:11 #555436 by darlington
1982 KZ 1000J Cylinders/Pistons was created by darlington
These have just been removed from a good running motor. A leak test was done and the motor passed with flying colours. The rings end gap is .016" or .40mm which is like new, well within the .7mm limit.The pistons look very clean. The block has a few chip out of the fins close to where the head meets the block. Not very noticeable when the motor is complete. This is an inexpensive way to get that new bike compression.$200 Steve 613-283-0150 teamkz@rogers.com
Keeping the good times rolling since 1982. Helping people with parts ,technical support and service of the 70's 80's Kawasakis. Building road bike bikes for individuals involved in Vintage Road Racing in the eastern Ontario region.
Last edit: 23 Oct 2012 20:11 by darlington.

Please Log in or Create an account to join the conversation.

  • mark1122
  • Offline
  • User
  • Keep twisting it
More
23 Oct 2012 20:53 #555448 by mark1122
Replied by mark1122 on topic 1982 KZ 1000J Cylinders/Pistons
u may want to copy and paste this into the for sale section for better results. ;)
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links