4-2 headers, any still being made?

  • high toned son of a bitch
  • Topic Author
  • Offline
  • User
More
08 Jun 2006 20:43 #53097 by high toned son of a bitch
4-2 headers, any still being made? was created by high toned son of a bitch
Ok,
All I need is a set of pipes. I have been looking for a set of 4-2 "headers" for my 1000 for a little while and not able to find anything. I looked in the archives and saw a set made by Jardine, but few and far between.

On a engine with aftermarket ignition, different carbs, and K/N pods:
Is the power gain much different between the 4-2 style like the Jardine (1&4, 2&3) or a different type with cylinders (1&2, 3&4) paired togather?

Is the sound different between the two styles?

I like the sound of my 4-1 but am needing the symmetrical look of a tip on each side. I cannot see any way to run a y-pipe off of my 4-1 to be able to split it to the left side of the bike. It angles to hard to the right to be able to bring it back around

My 4-1 has a Megaphone style tip with no baffle. Where can I buy these megaphone style pipes at? Last resort I was going to buy a set of "Megs" car tips and use them.

ANy pipes off of these newer bikes come close to fitting? I see 636, Ninja, etc. headers on Ebay all the time CHEAP, but not too many old KZ stuff. Is the exhaust pipe spacing the same by chance?

Been looking at this thread and this is what I would like to have. The megaphone on my 4-1 looks like what is on JTMmuccolluchs bike, but I don't have a baffle. I want this style on each side.
Thanks,
Mike


kzrider.com/component/option,com_joomlab...id,2/id,28296/#28296

Please Log in or Create an account to join the conversation.

More
09 Jun 2006 06:48 #53158 by Mcdroid
Replied by Mcdroid on topic 4-2 headers, any still being made?
Mike:

Check with www.denniskirk.com as they still list a chrome Mac 4into2 setup for your bike for $300.00+

Michael
Victoria, Texas

1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A

Please Log in or Create an account to join the conversation.

More
09 Jun 2006 08:11 #53171 by rdhussey
Replied by rdhussey on topic 4-2 headers, any still being made?
Will kz750 headers fit? I have a spare set that need a little work you could have.

Please Log in or Create an account to join the conversation.

More
09 Jun 2006 11:26 #53197 by patmann
Replied by patmann on topic 4-2 headers, any still being made?
Watch eBay...
I've seen a number of factory 900-1000 LTD Jardine sets on there. Of course there are none now:( One guy has a partial look alike set.
I've bought two REAL nice sets off there at less than $200.00 shipped.
No they aren't for sale either;) I keep an out for you too. Good luck.
Pat
Here's the ebay set. I wouldn't touch them at that price and condition.

cgi.ebay.com/ebaymotors/76-KAWASAKI-KZ-9...temZ4648127725QQrdZ1

Post edited by: patmann, at: 2006/06/09 14:29

1974 900 Z1 modified to look like a LTD , some engine mods. But I still have all the original parts.
1977 1000 project bike
1972 H1 project bike
If pro is opposite of con, then what is the opposite of progress?

Please Log in or Create an account to join the conversation.

More
09 Jun 2006 13:04 #53214 by 77KZ650
Replied by 77KZ650 on topic 4-2 headers, any still being made?
as stated, just keep checking ebay. thats how i got my 4-1 at a good price

07 MDP Rookie of the Year
01 ZX-12R street/drag bike. 8.97 @155.7 pump gas, dot tires, no bars, no power adders. top speed in the 1/4: 161MPH

Please Log in or Create an account to join the conversation.

  • Duck
  • Offline
  • User
  • e vica na i sau na ga
More
09 Jun 2006 14:17 #53232 by Duck
Replied by Duck on topic 4-2 headers, any still being made?
maybe some police bike pipes from someone going to a different setup? Should not be too expensive.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum