ZN1100 Exhaust switch

More
25 Apr 2012 16:33 #518032 by bexx
ZN1100 Exhaust switch was created by bexx
Good afternoon gentlemen (&ladies if applicable). I recently purchased a very clean 1984 ZN1100.
I've already switched the rear suspension and am about to install new handlebars and Dyna ignition. I'd love to switch the stock exhaust for a nice 4 into 1 but have only found 1(MAC 4into1 canister) that seems to be a direct match.
I know there are ZN's out there with other 4 into 1's installed(Kerker etc.), I've seen online pictures, I just can't find any on company websites that match this bike.
Any advice would be appreciated. Thanks!

Please Log in or Create an account to join the conversation.

  • mark1122
  • Offline
  • User
  • Keep twisting it
More
25 Apr 2012 17:52 #518045 by mark1122
Replied by mark1122 on topic ZN1100 Exhaust switch
welcome to the forum.
u may want to try super trap. they bought Kerker.

www.supertrapp.com/product_sections/motorcycle/sport.asp

76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

More
25 Apr 2012 18:42 #518052 by bexx
Replied by bexx on topic ZN1100 Exhaust switch
I would love to put a Kerker Meg on, but again, my bike's not listed as compatible(on company website).
I've read that an earlier KZ1000J is pretty much the same fit, but not sure.
BTW mark1122,your bike is a beauty!!

Please Log in or Create an account to join the conversation.

  • mark1122
  • Offline
  • User
  • Keep twisting it
More
25 Apr 2012 18:59 #518054 by mark1122
Replied by mark1122 on topic ZN1100 Exhaust switch
Thanks.
If your motor is a like the J then the only issue would be the hanger bracket. if u could get your hands on an old pipe from a J then u could try it for fit and then buy a nice one ?

76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

More
25 Apr 2012 23:34 #518112 by oldkaw
Replied by oldkaw on topic ZN1100 Exhaust switch
You may be able to find something if you look at what fits 83-84 gpz1100 or the early 80's kz1100

2 1984 zn1100, 1 1985 projects
1984 zn700 oil cooler, kerker 4-1, mikuni 34's, k&n pods
1984 zn700 stock
1982 kz750m1 stock
1975 cb550k
1975 cb360t

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum