Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC:

Cam difference for P-model v. J-model 11 Apr 2006 13:27 #38680

  • waterman
  • waterman's Avatar Topic Author
  • Offline
  • User
  • Posts: 102
  • Thank you received: 0
Quick question. Does the P model engine after 1981 have the K-model, J-model or some other cams? (I did a search-in fact a few-and this does not search well...or the question hasn't been asked.

Please Log in or Create an account to join the conversation.

Cam difference for P-model v. J-model 11 Apr 2006 18:39 #38786

  • wiredgeorge
  • wiredgeorge's Avatar
  • Offline
  • User
  • Posts: 5310
  • Thank you received: 44
I sure can't imagine the 82 P1 being any different spec than the 81 J1 as the engines seem the same to me but I could be wrong. Since Kaw never puts cam specs in the shop manuals, you would have to actually do some measuring on both models to be sure. I haven't heard this question come up before.
wiredgeorge Motorcycle Carburetors
Mico TX
www.wgcarbs.com
Too many bikes to list!

Please Log in or Create an account to join the conversation.

Cam difference for P-model v. J-model 11 Apr 2006 20:44 #38864

  • kzbikeman
  • kzbikeman's Avatar
  • Offline
  • User
  • Posts: 28
  • Thank you received: 0
Somewhere I saw measurements for both K and J models. It seems to me that the j was slighlty higher lift. I wish I could remember where I saw it! (I have been told memory is the second thing to go...)

Please Log in or Create an account to join the conversation.

Cam difference for P-model v. J-model 11 Apr 2006 21:13 #38880

  • craigpuckett
  • craigpuckett's Avatar
  • Offline
  • User
  • Posts: 123
  • Thank you received: 0
P model has the same cams as the K,M,1100A,D,ect. they have 2 stripes on the tachdrive boss

they are milder than the J,Gpz
the 81-82J has no stripes on the intake and one stripe on the ex.
the 81 Gpz uses J cams, the 82 Gpz has 3 stripes

I don't know about the 83-84 Gpz

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Powered by Kunena Forum