rebuilding 750 twin, need some info

I am trying to rebuild a friends engine and all I can find is info on 4 cyl 750s. I am finding parts, just not a manual. can I use the info in my 4 cyl manual like torque specs and such?

You ought to be able to find a manual on ebbaayy.
A few are currently listed... one is real cheap & probably won't go too high.

I've got a manual. I'll scan the appropriate pages. What else will you need?

Bill

just need to know how to set the cam timing, adjust the timing chain, and the torque specs for the bolts. thanks very much.

www.armbell.com/forum/index.php?mforum=kz400

You might also consider joining the above group...lots of info on 750 twins and it is an active group.



kz750twins.com/

And also this group/site... two members who formerly frequented KZRider.com are on those sites (Steell and Biquetoast)

Hybridden wrote:

I am trying to rebuild a friends engine and all I can find is info on 4 cyl 750s. I am finding parts, just not a manual. can I use the info in my 4 cyl manual like torque specs and such?

No, but I got a CD ROM manual for the 750 twins off ebay for $6 a while back.

I really wouldn't try building the engine up without the manual, it shows a lot of little things you need to know like where the O rings go and how to manipulate the cam chain guide.

Here are the pages from the factory manual that address fastener torques.

PDF's not allowed. Working on it!

Later: I've got what you need. my email address is: kzcsi@yahoo.com send me an email and I'll send you a PDF with all the torques you're needing.

Good Luck
Bill