V&H 13002PCO

More
05 Jan 2010 07:39 #341894 by cuskaw74
V&H 13002PCO was created by cuskaw74
My girlfriend just got these pipes for my 74 z1, does anyone have these, and was there actually any front end modification that needed to be done to fit them?
74 z1900 (in progress again)
74 z1900 (parts Bike)
75 Moto Guzzi v1000 convert

Asheville, NC
www.rockstarmarble.com

Please Log in or Create an account to join the conversation.

More
05 Jan 2010 08:42 #341902 by Mcdroid
Replied by Mcdroid on topic V&H 13002PCO
Not sure about the front end, but I believe you'll have to modify your right footpeg and rear brake pedal as the pipe is not compatible with a stock stance.
Michael
Victoria, Texas

1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A

Please Log in or Create an account to join the conversation.

More
05 Jan 2010 08:55 #341903 by cuskaw74
Replied by cuskaw74 on topic V&H 13002PCO
I have already made those mods for the old pipe (13001)
74 z1900 (in progress again)
74 z1900 (parts Bike)
75 Moto Guzzi v1000 convert

Asheville, NC
www.rockstarmarble.com

Please Log in or Create an account to join the conversation.

More
05 Jan 2010 16:37 #341935 by timebomb33
Replied by timebomb33 on topic V&H 13002PCO
i'd recommend raking your frame anywhere from 7 to 10 degrees with that pipe not built for a stock chassis.
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE

Please Log in or Create an account to join the conversation.

  • Kawiman80
  • Offline
  • User
  • On my 2nd KZ1000
More
09 Jan 2010 00:01 #342310 by Kawiman80
Replied by Kawiman80 on topic V&H 13002PCO
What do those look like? I'm not familiar with the part #'s. And where did she find them?
1980 kz1000g 1105 34mm Mikuni flat slides Kerker exhaust custom paint stock ignition(Dyna 2000 soon) Accel coils and wires stock cams w/ heavy springs for more rpm. My 2nd 1000.

Please Log in or Create an account to join the conversation.

More
09 Jan 2010 00:36 #342312 by Mcdroid
Replied by Mcdroid on topic V&H 13002PCO
Kawiman80 wrote:

What do those look like? I'm not familiar with the part #'s. And where did she find them?


Google the part number and follow some of the hits for a picture or two. V&H no longer shows the pipe on their site so it would have to be found through existing stock at an aftermarket vendor.
Michael
Victoria, Texas

1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A

Please Log in or Create an account to join the conversation.

More
09 Jan 2010 14:32 - 09 Jan 2010 14:32 #342377 by cuskaw74
Replied by cuskaw74 on topic V&H 13002PCO
Actually, I got the last set that vance & hines had....they couldnt tell me if they were discontinued or not. Noone else had them, at least that i could find.
74 z1900 (in progress again)
74 z1900 (parts Bike)
75 Moto Guzzi v1000 convert

Asheville, NC
www.rockstarmarble.com
Last edit: 09 Jan 2010 14:32 by cuskaw74.

Please Log in or Create an account to join the conversation.

  • Kawiman80
  • Offline
  • User
  • On my 2nd KZ1000
More
10 Jan 2010 23:05 #342535 by Kawiman80
Replied by Kawiman80 on topic V&H 13002PCO
i did some looking and parts unlimited still carries them. Around 400 bucks for the pco and 240 for the standard. No ps replica though--- discontinued!!!!1
1980 kz1000g 1105 34mm Mikuni flat slides Kerker exhaust custom paint stock ignition(Dyna 2000 soon) Accel coils and wires stock cams w/ heavy springs for more rpm. My 2nd 1000.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links