Need motor info

More
03 Jan 2010 11:28 #341696 by ROCKITV8
Need motor info was created by ROCKITV8
Hi, I have a motor that I was given and I would like to know what size it is. The serial number is KZ650BE067864 can someone help me out with this?B)

Please Log in or Create an account to join the conversation.

  • mark1122
  • Offline
  • User
  • Keep twisting it
More
03 Jan 2010 13:05 #341698 by mark1122
Replied by mark1122 on topic Need motor info
looks like a KZ650.
look up the serial # at Z1E and u will find the year.B)

76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

More
03 Jan 2010 13:58 #341701 by ROCKITV8
Replied by ROCKITV8 on topic Need motor info
What is the website? Thanks

Please Log in or Create an account to join the conversation.

More
03 Jan 2010 14:38 #341705 by Buda
Replied by Buda on topic Need motor info

1982 KZ 1170 LTD
10.25 to 1 comp
K&N pods
GPZ cams
Vance&Hines pipe with comp baffle
dyna coils and wires
97 Valkyrie Standard

Please Log in or Create an account to join the conversation.

More
03 Jan 2010 15:05 #341708 by ROCKITV8
Replied by ROCKITV8 on topic Need motor info
Ok, now I am geting frustrated! call me stupid, but I don't see anywhere on that site to look up serial numbers

Please Log in or Create an account to join the conversation.

More
03 Jan 2010 15:54 #341715 by 650ed
Replied by 650ed on topic Need motor info
It's a 1978 KZ650. If you look carefully at the bottom of the cylinder fins on the left side you should see "652cc" cast into the metal. Ed

1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

More
03 Jan 2010 16:00 #341719 by ROCKITV8
Replied by ROCKITV8 on topic Need motor info
THANK YOU !!!!!!!!!!!!!!!!:woohoo: :woohoo:

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum