KZ1000 valve to guide clearance?

beefsquasher
Topic Author
Offline
User

17 Nov 2009 18:54 #334395 by beefsquasher

KZ1000 valve to guide clearance? was created by beefsquasher

I am ready to hone my valve guides for the proper stem-to-guide clearance, but I don't know what it should be.

The Kawasaki service manual only states minimum and maximum sizes for the guides and valves, not actual clearance, and only offers an inaccurate "wobble" test for measuring clearance.

Kibblewhite (I am using their valves and guides) recommends .001" to .0015" for intakes and .002" for exhausts.

Any opinions or tips?

-Dave

1977 KZ1000 Mutt - 1075, Kenny Harmon Cams .400", RS34, Kerker, Dyna S

1997 Honda XR250R
1977 Yamaha XS360
1972 BMW R60/5

Please Log in or Create an account to join the conversation.

bountyhunter
Offline
User

17 Nov 2009 19:05 #334400 by bountyhunter

Replied by bountyhunter on topic KZ1000 valve to guide clearance?

Those numbers sound like the right ballpark.

1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

TeK9iNe
Offline
User
What did you do!?!

17 Nov 2009 19:39 - 17 Nov 2009 19:50 #334412 by TeK9iNe

Replied by TeK9iNe on topic KZ1000 valve to guide clearance?

bountyhunter wrote:

Those numbers sound like the right ballpark.

Agreed

Those will work fine for you.

Motorcycle Shop Owner/Operator

79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors

Last edit: 17 Nov 2009 19:50 by TeK9iNe.

Please Log in or Create an account to join the conversation.

MFolks
Offline
User

17 Nov 2009 20:06 #334422 by MFolks

Replied by MFolks on topic KZ1000 valve to guide clearance?

Looked at these tools? racetoolz.com/

1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

BSKZ650
Offline
User

18 Nov 2009 05:17 #334441 by BSKZ650

Replied by BSKZ650 on topic KZ1000 valve to guide clearance?

size is correct, and when you assemble the head, make sure to lube the valve and guides, that is the last place that gets oil when you start the engine

77 kz650, owned for over 25 years
77 ltd1000, current rider
76 kz900, just waiting
73 z1,, gonna restore this one
piglet, leggero harley davidson
SR, Ride captian, S.E.Texas Patriot Guard Riders.. AKA KawaBob

Please Log in or Create an account to join the conversation.

KZ1000 valve to guide clearance?

Forum Links