Yoshimura RS-3 exhaust can on a 74 z1
- oldkaws4ever
-
Topic Author
- Offline
- User
-

Registered
- Have no regrets...... You only live once.
- Posts: 1641
- Thanks: 11
Re: Yoshimura RS-3 exhaust can on a 74 z1
26 Sep 2008 23:14
ya it has grown on me as well andy. Tonight i was playing around with it in an empty parking lot pulling wheelies in 1st and second gear. I was even screwing with the tuner car croud, i blew the doors off of some honda with a coffee can exhaust. It has so much power. And the hesitation comming off the line is gone. It is just about as smooth running as your 650 i rode at mid ohio, a tad bit louder but not get the cops attention loud. When i was wheelying in the empty lot an unmarked squad car came through......he actually let me wheelie for about ten minutes before he told me to go home......lol.
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6073
- Thanks: 225
Re: Yoshimura RS-3 exhaust can on a 74 z1
27 Sep 2008 05:05.he actually let me wheelie for about ten minutes before he told me to go home......lol
He was enjoying the show while on his Dunken Donut break....
Honda... We need the story indeed...Which models ass did you kick?
BTW, update your new pipe images in your project... Love that pipe, friggin thing just looks massive on your bike.
Probably scares the hell out of any other rider you come across thats thinking about racing you off the line.
OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- donthekawguy
-
- Offline
- User
-

Registered
- Posts: 1912
- Thanks: 8
Re: Yoshimura RS-3 exhaust can on a 74 z1
27 Sep 2008 10:46
Here is my 78 with a zx6 pipe on it. I also went to Meinkie. They get bored doing the same old thing day in and day out and love to do custom stuff.
Rathdrum Idaho
1971 Kawasaki g3ss
1972 Yamaha R5 350
1965 Suzuki Hillbilly
1964 Yamaha 125
1971 Kawasaki g3ss
1972 Yamaha R5 350
1965 Suzuki Hillbilly
1964 Yamaha 125
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6073
- Thanks: 225
Re: Yoshimura RS-3 exhaust can on a 74 z1
27 Sep 2008 11:55
Holly crap (no pun intended due to your skivies) that looks seriously wicked!
Damn, that old girl just has some mean ass attitude...
Just beautiful.... does she have tits?
OMR
Damn, that old girl just has some mean ass attitude...
Just beautiful.... does she have tits?
OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- oldkaws4ever
-
Topic Author
- Offline
- User
-

Registered
- Have no regrets...... You only live once.
- Posts: 1641
- Thanks: 11
Re: Yoshimura RS-3 exhaust can on a 74 z1
27 Sep 2008 13:21
Old Man Rock wrote:
I think it was a honda civic but i dunno, it looked like he has 8 inch rims....lol. I Honestly think he just spent bookoo bucks on the exterior, and 40.00 at auto sone for the muffler. Cause that car was damn slow. I only raced him because, i stopped off at white castle for a bite to eat, and when i came out he asked me what size it was. I said a 900. Then he asked what i ran in the quarter, and i said mid 12's. He said well i rund a 15, but i think i can take you cause i have fuel injection and yours is carburated. I was laughing, and in doing this it must have really upset him cause he demanded that we raced right there. So there was about a 3/4 mile strait away. We lined them up, and cause since im since a nice guy i let him beat the crap out of his clutch when he dumped it comming off the line. I slowly accelerated and pulled a wheelie in first wich made all the other tuner car peoples mouths drop wide open in amazement. Then shifted into 2nd got even with his drivers door, looked over and waved then kicked the old girl in the ass for everything she had just to further humiliate him. When i got back by the tuner crowd, i asked the dude i raced if he thought my bike was running a bit off, cause it just didnt run like it usually does. Then he got pissed off got in his car, took off and proceeded to drift around a corner and damn near took his car out on the sidewalk. All the tuner people said im more than welcome to hang out with them anytime. LOL:cheer:
:laugh: :laugh: :lol: :silly: :woohoo: :side: :woohoo: :silly:
.he actually let me wheelie for about ten minutes before he told me to go home......lol
He was enjoying the show while on his Dunken Donut break....
Honda... We need the story indeed...Which models ass did you kick?
BTW, update your new pipe images in your project... Love that pipe, friggin thing just looks massive on your bike.
Probably scares the hell out of any other rider you come across thats thinking about racing you off the line.
OMR
I think it was a honda civic but i dunno, it looked like he has 8 inch rims....lol. I Honestly think he just spent bookoo bucks on the exterior, and 40.00 at auto sone for the muffler. Cause that car was damn slow. I only raced him because, i stopped off at white castle for a bite to eat, and when i came out he asked me what size it was. I said a 900. Then he asked what i ran in the quarter, and i said mid 12's. He said well i rund a 15, but i think i can take you cause i have fuel injection and yours is carburated. I was laughing, and in doing this it must have really upset him cause he demanded that we raced right there. So there was about a 3/4 mile strait away. We lined them up, and cause since im since a nice guy i let him beat the crap out of his clutch when he dumped it comming off the line. I slowly accelerated and pulled a wheelie in first wich made all the other tuner car peoples mouths drop wide open in amazement. Then shifted into 2nd got even with his drivers door, looked over and waved then kicked the old girl in the ass for everything she had just to further humiliate him. When i got back by the tuner crowd, i asked the dude i raced if he thought my bike was running a bit off, cause it just didnt run like it usually does. Then he got pissed off got in his car, took off and proceeded to drift around a corner and damn near took his car out on the sidewalk. All the tuner people said im more than welcome to hang out with them anytime. LOL:cheer:
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6073
- Thanks: 225
Re: Yoshimura RS-3 exhaust can on a 74 z1
27 Sep 2008 13:31i asked the dude i raced if he thought my bike was running a bit off, cause it just didnt run like it usually does. Then he got pissed off got in his car,
Your place in Kawi HELL is waiting...hahahahaha :laugh:
It sure would have been great if he wiped out the car on the curbside... Classic Kodak moment.
Too friggin funny.
OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- oldkaws4ever
-
Topic Author
- Offline
- User
-

Registered
- Have no regrets...... You only live once.
- Posts: 1641
- Thanks: 11
Re: Yoshimura RS-3 exhaust can on a 74 z1
27 Sep 2008 13:38
LOL ya it is for sure OMR. Everybody said he has an ego problem, he is better than everyone else, but not last night....lol
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
Please Log in or Create an account to join the conversation.
- bigkzfan
-
- Offline
- User
-

Registered
- if grandpa had tits he"d be grandma, if
- Posts: 156
- Thanks: 1
Re: Yoshimura RS-3 exhaust can on a 74 z1
27 Sep 2008 16:33
lol just my luck i work at car x in cincinnati ohio and we have everything we need to do things like that..anybody close to or around cincinnati stop in and see me..john..i have been in the business 19 years so i know what the same old routine is and besides kz owners are the coolest motorcycle owners..
hello, i own a 1982 kz1000 j model with a 4into1 header and factory air box...
Please Log in or Create an account to join the conversation.
- oldkaws4ever
-
Topic Author
- Offline
- User
-

Registered
- Have no regrets...... You only live once.
- Posts: 1641
- Thanks: 11
Re: Yoshimura RS-3 exhaust can on a 74 z1
27 Sep 2008 19:43
bigkzfan wrote:
Ya the guy that made the mid pipe said it was cool to do something custom, rather than the same old thing. And yes your right kz owners are the coolest. lolB)
:silly: :side: :woohoo:
lol just my luck i work at car x in cincinnati ohio and we have everything we need to do things like that..anybody close to or around cincinnati stop in and see me..john..i have been in the business 19 years so i know what the same old routine is and besides kz owners are the coolest motorcycle owners..
Ya the guy that made the mid pipe said it was cool to do something custom, rather than the same old thing. And yes your right kz owners are the coolest. lolB)
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
Please Log in or Create an account to join the conversation.
- oldkaws4ever
-
Topic Author
- Offline
- User
-

Registered
- Have no regrets...... You only live once.
- Posts: 1641
- Thanks: 11
Re: Yoshimura RS-3 exhaust can on a 74 z1
28 Sep 2008 20:06
Well i rode the old girl on a 100 mile or so ride today. It ran so good, and to boot was getting 43ish mpg. It was so nice to have a quite ride versus the open header. It has so much low end tourqe and cuises and sounds so good at 65.
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
Please Log in or Create an account to join the conversation.
- oldkaws4ever
-
Topic Author
- Offline
- User
-

Registered
- Have no regrets...... You only live once.
- Posts: 1641
- Thanks: 11
Re: Yoshimura RS-3 exhaust can on a 74 z1
29 Sep 2008 17:01
Well since it was raining today, i made a bracket for the can. I just bent some scrap steel i had laying around. It looks good and the can is on there good now. Il post some pics when the weater gets nice out. It runs from the top shock mount down to the can.
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
