motor problems!
- RollingStock
-
Topic Author
- Offline
- User
-

Registered
- Posts: 189
- Thanks: 0
motor problems!
02 Dec 2007 17:42
i picked up a 82 kz550A last weekend.. story i got was guy bought the bike from a friend but couldnt get it running so he let it sit outside for a year without the carbs!!!! so needles to say i cant the jugs off....
heres my question can i swap over stock 650 jugs and pistons?..
and also iv tryed seaching for a 4-1 exhaust but cant seem to find any used ones. could i use a 650 exhaust or a newer exhaust system?.. i have a zx600d parts bike and the exhaust would work but the flanges arent in the right place
Post edited by: RollingStock, at: 2007/12/02 20:44
heres my question can i swap over stock 650 jugs and pistons?..
and also iv tryed seaching for a 4-1 exhaust but cant seem to find any used ones. could i use a 650 exhaust or a newer exhaust system?.. i have a zx600d parts bike and the exhaust would work but the flanges arent in the right place
Post edited by: RollingStock, at: 2007/12/02 20:44
73 z1900 street nitrous drag bike(powered but honda)
83 kz750 turbo street fighter project
83 kz750 turbo street fighter project
Please Log in or Create an account to join the conversation.
- The Milkman
-
- Offline
- User
-

Registered
- Posts: 794
- Thanks: 194
Re: motor problems!
02 Dec 2007 18:21
there are several threads on here about putting the 6 speed 550 gears in a 650 tranmission,,
this is one.
But haven't seen anything about putting the 650 cylinders on a 550. My guess would be that the crank spacings would be different on them.
Rise sace
But haven't seen anything about putting the 650 cylinders on a 550. My guess would be that the crank spacings would be different on them.
Rise sace
78 650-C2, Stock engine, Jardine 4-2 Exh., 17-38 sprockets, dyna ignition and coils, coil wiring mod, carb mod.
The following user(s) said Thank You: GPz550D1
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
