- Posts: 143
- Thank you received: 1
Wiseco 810cc kit
- badboie
- Topic Author
- Offline
- User
Less
More
26 Nov 2007 20:06 #182800
by badboie
Wiseco 810cc kit was created by badboie
where can I find one? Ive been looking for a few hours with no answer. any help? thanks
Please Log in or Create an account to join the conversation.
- APE Jay
- Offline
- Banned
Less
More
- Posts: 1403
- Thank you received: 58
26 Nov 2007 22:25 #182807
by APE Jay
Replied by APE Jay on topic Wiseco 810cc kit
Please Log in or Create an account to join the conversation.
- steell
- Offline
- User
27 Nov 2007 05:13 #182814
by steell
KD9JUR
Replied by steell on topic Wiseco 810cc kit
You might want to take advantage of APE's discount on boring/honing when you buy the pistons from them, IIRC it's around $90 with purchase of a piston kit.
KzZone is APE
Post edited by: steell, at: 2007/11/27 08:14
KzZone is APE
Post edited by: steell, at: 2007/11/27 08:14
KD9JUR
Please Log in or Create an account to join the conversation.
- Lorcan
- Offline
- User
- Speed Loony
Less
More
- Posts: 580
- Thank you received: 59
28 Nov 2007 09:41 #182967
by Lorcan
760cc - 8.69@162mph
810cc, 211mph www.750turbo.com
www.stormdragbike.com
Replied by Lorcan on topic Wiseco 810cc kit
steell wrote:
Bargain!
You might want to take advantage of APE's discount on boring/honing when you buy the pistons from them, IIRC it's around $90 with purchase of a piston kit.
Bargain!
760cc - 8.69@162mph
810cc, 211mph www.750turbo.com
www.stormdragbike.com
Please Log in or Create an account to join the conversation.
- steell
- Offline
- User
28 Nov 2007 14:38 #182986
by steell
KD9JUR
Replied by steell on topic Wiseco 810cc kit
I was close
$160 for a "Class A" bore and hone using state of the art equipment done by the experts, vs $180 locally using a Bridgeport and a 1/2" drill motor powered cylinder hone, vs $0.00 done on my Gorton vertical mill and a 1/2" drill motor powered Snap-On cylinder hone.
I'll do my own 750 twin cylinders, but the cylinder block for my maximum performance 750/810 four is going to the experts at APE for the work.
LC100 Bore and hone with piston purchase $95.00
LC150 Bore and hone with customer's pistons 160.00
$160 for a "Class A" bore and hone using state of the art equipment done by the experts, vs $180 locally using a Bridgeport and a 1/2" drill motor powered cylinder hone, vs $0.00 done on my Gorton vertical mill and a 1/2" drill motor powered Snap-On cylinder hone.
I'll do my own 750 twin cylinders, but the cylinder block for my maximum performance 750/810 four is going to the experts at APE for the work.
KD9JUR
Please Log in or Create an account to join the conversation.
- MadMac74
- Offline
- User
Less
More
- Posts: 64
- Thank you received: 0
01 Dec 2007 15:56 #183411
by MadMac74
'78 KZ650 C2,810 conversion,stock kz 750 cams,with a Blueprinted Head both from a '81 KZ 750. BS 34 Mikunis, Mac /Kerker 4 into 1 with custom 2" comp baffle. 3 rd owner
'02 ZRX1200R, 3rd owner
'83 XR200R, 3 rd owner
'84 V65 Sabre 3 rd owner
Replied by MadMac74 on topic Wiseco 810cc kit
I was luckey enough to get one off e-bay for 399.99 brand new. But thats a deal and a half!! 445.00
you know ya want it... do it!!
MAC:evil:
you know ya want it... do it!!
MAC:evil:
'78 KZ650 C2,810 conversion,stock kz 750 cams,with a Blueprinted Head both from a '81 KZ 750. BS 34 Mikunis, Mac /Kerker 4 into 1 with custom 2" comp baffle. 3 rd owner
'02 ZRX1200R, 3rd owner
'83 XR200R, 3 rd owner
'84 V65 Sabre 3 rd owner
Please Log in or Create an account to join the conversation.
- MadMac74
- Offline
- User
Less
More
- Posts: 64
- Thank you received: 0
01 Dec 2007 15:57 #183413
by MadMac74
'78 KZ650 C2,810 conversion,stock kz 750 cams,with a Blueprinted Head both from a '81 KZ 750. BS 34 Mikunis, Mac /Kerker 4 into 1 with custom 2" comp baffle. 3 rd owner
'02 ZRX1200R, 3rd owner
'83 XR200R, 3 rd owner
'84 V65 Sabre 3 rd owner
Replied by MadMac74 on topic Wiseco 810cc kit
I was luckey enough to get one off e-bay for 399.99 brand new. But thats a deal and a half!! 445.00
you know ya want it... do it!!
MAC:evil:
you know ya want it... do it!!
MAC:evil:
'78 KZ650 C2,810 conversion,stock kz 750 cams,with a Blueprinted Head both from a '81 KZ 750. BS 34 Mikunis, Mac /Kerker 4 into 1 with custom 2" comp baffle. 3 rd owner
'02 ZRX1200R, 3rd owner
'83 XR200R, 3 rd owner
'84 V65 Sabre 3 rd owner
Please Log in or Create an account to join the conversation.