KZ1000p police bike

Hows it goin! Ive got a kz1000p5 police bike from 1986,Im lookin for some information,Ive got a bent valve on cylinder #3 and I think Ill need a new valve,shim(s) and probably a cylinder heed!! Can anyone tell me any part numbers?!! I want to cross ref them with Kawasaki UK to see if a Z1 heed will fit the KZ!!As this will be cheaper than importin these from the USA!! Cheers Sean.

im guessing you have a j motor,which is differant from the z-series of motors;)

I have a good used head, complete with valves.
$100 plus shipping.

Why do you think you need a new head?

You can order a new valve from one of the many on line parts houses. After you lap and before you put the springs back in, you can measure your clearances, sort your shims, and order the ones you need.

I can send you a used 'serviceable' valve.

-Duck

Been away at a rally all weekend so this is me jus back! ive been told its a P-series,dont know if thats a J motor! It loks like the valve is stuck in the head so im thinkin rather than goin to all the bother of fittin valves i would jus get a cmplete heed!Ive found the part no of the heed-11008-1068!but the guy at kawa uk told me a z1100a3 cylinder heed is the same,but im not so sure!!!! That heed for $100 sounds gid! How much would shippin be for that florida?Iv got a couple of guys to see yet so Ill let you know how I get on!Cheers for all the info!!!!!

The P-series is a J. The Z-series will not work.

Part number 11008-1068


KZ1000-P1 Police 1000 (1982)-->CYLINDER HEAD
KZ1000-P2 Police 1000 (1983)-->CYLINDER HEAD
KZ1000-P3 Police 1000 (1984)-->CYLINDER HEAD
KZ1000-P4 Police 1000 (1985)-->CYLINDER HEAD
KZ1000-P5 Police 1000 (1986)-->CYLINDER HEAD
KZ1000-P6 Police 1000 (1987)-->CYLINDER HEAD
KZ1000-P7 Police 1000 (1988)-->CYLINDER HEAD
KZ1000-P8 Police 1000 (1989)-->CYLINDER HEAD
KZ1000-P9 Police 1000 (1990)-->CYLINDER HEAD
KZ1000-P10 Police 1000 (1991)-->CYLINDER HEAD
KZ1000-P11 Police 1000 (1992)-->CYLINDER HEAD
KZ1000-P12 Police 1000 (1993)-->CYLINDER HEAD
KZ1000-P13 Police 1000 (1994)-->CYLINDER HEAD
KZ1000-P14 Police 1000 (1995)-->CYLINDER HEAD
KZ1000-P15 Police 1000 (1996)-->CYLINDER HEAD
KZ1000-P16 Police 1000 (1997)-->CYLINDER HEAD
KZ1000-P17 Police 1000 (1998)-->CYLINDER HEAD
KZ1000-P18 Police 1000 (1999)-->CYLINDER HEAD
KZ1000-P19 Police 1000 (2000)-->CYLINDER HEAD
KZ1000-P20 Police 1000 (2001)-->CYLINDER HEAD
KZ1000-P21 Police 1000 (2002)-->CYLINDER HEAD
KZ1000-P22 Police 1000 (2003)-->CYLINDER HEAD
KZ1000-P24 Police 1000 (2005)-->CYLINDER HEAD
KZ1100-L1 LTD Shaft (1983)-->CYLINDER HEAD

And that's just the ones that are silver

Pretty much any J style cylinder head will work, from 1981 on, except the 1981 Police model (it used the early style 1000 motor).

Post edited by: steell, at: 2007/06/03 13:19

Aye just as I thought,I need a new heed!!Stripped it doon today and the shim has busted out the heed!!! Ill try and source one over here but if not Ill be interested in that one youve got FLORIDABIKER!!!!Cheers for all the help guys!!!!!Sean