cranks

I was wondering if someone could tell me what I have here, there are other pics to look at in the photo bucket of these cranks

Post edited by: itzkwik, at: 2007/04/17 21:47
s137.photobucket.com/albums/q218/itzkwik_photos/th_HPIM0366.jpg

Post edited by: itzkwik, at: 2007/04/17 21:51 i'll have to try getting better pics later

Post edited by: itzkwik, at: 2007/04/17 21:51

cant see really good in your picture but the one on the left looks like a kz1000 crank.count the teeth on center sprocket if it has 15 its a small pin,if it has 16 teeth its a large pin or mkII crank.the one on right side with the porkchop counterweights looks like a 900 crank;)oh yeah,welcome to z-jungle;)

Post edited by: wireman, at: 2007/04/17 22:36well now that i see the picture again it looks like 900 counterweights on both cranks!:blink: got a better picture?

Post edited by: wireman, at: 2007/04/18 00:03

my wife ran me off of the computer last night before i could get some more pics up but I have owned several bikes in the past , still have a 1989 zx-10 ninja in pieces, 1 raked I beleve J model frame , 2 cases 1 bored for a big block with big studs, big bore cyl.2 cranks . I have just completely forgotten what everything is.I wll get a link to my photo bucket album when I get back from work today , Thanks

i137.photobucket.com/albums/q218/itzkwik_photos/HPIM0361.jpg
i137.photobucket.com/albums/q218/itzkwik...359.jpg?t=1176937138
i137.photobucket.com/albums/q218/itzkwik...363.jpg?t=1176937188

Post edited by: itzkwik, at: i137.photobucket.com/albums/q218/itzkwik....jpg?t=1176937254/18 18:59

Post edited by: itzkwik, at: 2007/04/18 19:00

Post edited by: itzkwik, at: 2007/04/18 19:01

Post edited by: itzkwik, at: 2007/04/18 19:02

yep if they both look like that they are 900 cranks,kz1000 has round counter weights;)

Post edited by: itzkwik, at: 2007/04/18 18:57
anyone have a clue what those might be worth

Post edited by: itzkwik, at: 2007/04/18 19:04

those need a good soaking in some oil to make sure bearings dont get stuck,they look a little rough;)

i made sure they al spin freely but yeah they do need cleaned up,they are mk2 cranksI plan on taking them to motorcycles unlimited and have them cleaned and checked out

MK11 cranks have the number 1016 stamped on the rods. Those look like Z1 cranks. MK11 cranks also have 16t center pins...count those teeth!

yeah those have the porkchop counterweights like 900 crank,unless somebody spent the money having big center pins installed they should have 15 tooth sprockets;)

I'm gunna go get them out of storage tommorrow and some other parts I'll take some mor pics. the z1 cranks i saw had round shaped weights on oldkawman.com these have 1024 on the rods

Post edited by: itzkwik, at: 2007/04/20 19:02

i counted the teeth on the sorocket in the center of the crank and there are 20 teeth:huh: , i count the wrong sprocket or completely dif. crank. I went and grabbed all my old school bike stuff out of storage, 2- cranks ,2 sets of cases, 1 o ringed block , 1 guage cluster and all kinds of other parts, 1 complete set of triple tree with wheel raedy to bolt on