stock actuator Kawasaki Z1 or KZ non j

hi im looking for a stock actuator Kawasaki Z1 or KZ non j model for the following item i want to buy.
nothing on flea bay so i thought id ask in forum and classifieds

Our kits are CAD designed with strength and lightness in mind . Made from 6061 - T651 plate , these units take the place of your stock sprocket cover , making changing the sprocket much easier . It's also easier to adjust the clutch and you save some weight as a bonus . It also allows the use of an offset sprocket , which is not possible with the stock cover .
Shipped complete with all bolts and spacers required , just unbolt your old actuator and transfer it to your new part . The Kawasaki J, GPZ kit requires you to supply an actuator from a Kawasaki Z1 or KZ , all others use the stock actuator.


Post edited by: kano, at: 2007/03/09 08:24

Post edited by: kano, at: 2007/03/09 09:22

Would a KZ650s fit? I have two spare.

not sure their description is vaige
never heard it called a actuator before lol,
wireman says he is gonna look in his pile of parts for me.

Post edited by: kano, at: 2007/03/08 23:53

I just had a look at the parts diagrams and they are different. If the mounting bolts are spaced the same it may work, but there may be other variables such as depth of the actuator and how much push/throw they have.
.


Post edited by: rstnick, at: 2007/03/08 22:03

looking at that im not sure if their info is correct
given by speedmoto
but from the looks of the stock one on my motor it wont work ill see what i can find out!



Post edited by: kano, at: 2007/03/09 08:18

Post edited by: kano, at: 2007/03/09 09:24

BIG THX WIREMAN.
who sent me a actuator i love it here everyone is so cool friendly and generous.
your defiantly going on my Christmas list bro lol,
when the wife bakes some cookie's ill send you some..
thx again.

oatmeal cookies????????????:woohoo: :woohoo: :woohoo: :woohoo: no problem!

i too have had the Precision Metal Fab Racing clutch release bit on my cafe shopping list since the inception of my project.

Not till today did I notice that my stock clutch release bits don't work, and I verified with an email to PMFR before ordering it. Must have a Z1 Kz1000 non J motor clutch release.

Any other leads on where to find one? I'm in the market and am happy to paypal to whomever has one!

Everybody can't expect one for free, right?

All speedmotoco does, FYI, is source shit, buy it, and mark it up. I can link you to almost anything they sell externally. Just like cosmopolitan motors, and redline cycle, just resellers, not that there is anything wrong with that, I've just dealt with them all.

www.pmfronline.com/clutch_release_kits.htm

nice thanx saved us some bucks.

ordered my Clutch Release Kit today,
from Precision Metal Fab.
i must say very nice ppl,
even if they did have a bit of a
hard time understanding my east London accent lol.