$9,350.00........ wish it was me that did the biding.
1978 KZ650 b-2
700cc Wiseco kit 10 to 1.
1980 KZ750 cam, ape springs, stock clutch/ Barnett springs.
Vance and Hines Header w/ comp baffle and Ape pods, Dyna S and green coils, copper wires.
29MM smooth bores W/ 17.5 pilots, 0-6s and 117.5 main
16/42 gearing X ring chain and alum rear JT sprocket....
Yes, $9,350 Greg.
Question Greg? Z1R front fork legs? Partszilla says they are 78 -80 only Z1R
How do they differ from a standard KZ900 / KZ1000? 36mm
Different length? I am selling a set of standard forks, have a question from someone wanting to know if they would work on a 78 Z1R.
Livin in "CheektaVegas, NY
Still have a Kaw! 76 KZ900 Pro-Street.
Went thru 25 of these in 40 yrs.
And The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
FYI - Twin disc Z650 lowers are the same as Z1R ( the 650 stanctions are 1" shorter).
The only difference is the wire circlip above the bush in the 650 lower.
The casting has the same number on the wheel side near the mudguard mount.
It's either K207 or K204 . Can't remember which as it's been ages since i had a stock one.
All the 650/ 900/1015 bikes use the same stanction diameter and the lowers can be swapped.
Bushes are like hens teeth to find unless someone started making them again.
When I wanted some for mine about 18 years ago they were NLA and the original Japanese manufacturer wanted a minimum order of 50 thousand.
Mecum web results are fee inclusive. Sales tax applies, unless you are a dealer.
In person, I was not impressed. It was a mish-mash of pieces,and I doubt the bike ran well. Parting out is the best chance at making a profit on this bike in the buyers opinion.